Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by the end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

Manual Control over the TT1 turntable.

You can post your wishes for new features in future program versions here.

Manual Control over the TT1 turntable.

Postby MavCoGrips » Fri Dec 11, 2015 9:12 pm

It would be nice to have more control of the TT1.

1) Reset the TT to 0 deg. in it's current position.

2) Move the TT to a desired deg. or scan number (manually move the TT to ie: 32.. 47.... 68..90) and back to 0 deg.

3) Enable the TT to move in a positive or negative rotation.

4) Enable free movement of the TT 0-360 deg.

I use several fixtures to locate the object(s) I am scanning.
There are times where one or more of the scans need to be redone.
I would like to have the software be able to go back to a given location to re-scan at that position.

Thanks David!!
Posts: 1
Joined: Tue Dec 08, 2015 7:22 pm

Re: Manual Control over the TT1 turntable.

Postby Ralf » Fri Sep 09, 2016 6:26 am

Hallo David Team,
unfortunately it is a fact for me, that the TT1 is very impractical in some ways, because there are no manual operations.
Some Scans don't need to have uniformly rotation with the object.
So I have to turn the object by hand (on a nearly 1000EUR Truntable 8) ).
Also it may be necessary to make a full turn to have a look that the position is in range and the object is well aligned for turning

I think the TT1 is a high qualitiy product and it worthy of having more functions like until now.
And i think doing this will be slightly easier to program like the other complex math funktions.
So please, please give yourself a jolt to deal with the simple things :wink:

And YES I totally agree to David suggestions.
Anyone else? :)
DavidV5, SLS-3 Stereo, TT-1 DSL-1
W10 64Bit, 32GBRAM
Intel Xeon E5-1650v3
User avatar
Posts: 18
Joined: Mon Mar 21, 2016 8:20 am

Re: Manual Control over the TT1 turntable.

Postby drndadoo » Mon Sep 12, 2016 12:38 pm

I am forwarding this topic to developers. I can not promise that changes will occur instantly.
DAVID Support
Posts: 194
Joined: Tue Mar 24, 2015 3:09 pm

Return to Feature Wish List

Who is online

Users browsing this forum: No registered users and 0 guests