Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

calibration panels

Discussions about latest DAVID developments, beta versions...

calibration panels

Postby dental_art » Fri Apr 29, 2016 8:59 am

mr David :) because you do not produce panels of individual calibration from 60 mm or 30 mm would find them very comfortable for customized solutions

thank you
Posts: 18
Joined: Fri Jul 03, 2015 1:16 pm

Re: calibration panels

Postby conceptdsn » Sun Oct 16, 2016 5:44 pm

I have lasered out several panels from 300mm down to 30mm. i will shoot some pictures as soon as i build the structures for these panels.
If i was to sell the 300 mm panels they would be around 170-200 for the set. the material is from a white cast acrylic.
I currently made a base and wall frame that is exactly 90 degrees. using precision angle and lazer.
I confirmed it with a scan to make sure everything was accurate then i scanned an object with known dimensions and checked the accuracy afterward. i am impressed with how well the project worked.
Camera's: Canon eos t3i, 2x c615 webcams
150 mm calibration panel commonly used
acer k135 Projector/ infocus trial projector
Process computer: i7- 8 core processor, 128g ram, nvidia 6000
Posts: 9
Joined: Fri Aug 12, 2016 2:10 am

Re: calibration panels

Postby Oteck » Tue Oct 25, 2016 4:17 am

i had a sign shop made me one with composite aluminum backing (1/4" thick) to make it for around the $300 canadian. This is on a 40cm scale on a 31" square so you may have to sweet talk the sign shop to get you a nice deal, also since it's b/w it's wouldn't cost as much.... Mine has a flat finish so it doesn't reflect too much light but i kind of wish i used a shade grey for the dots.
Posts: 17
Joined: Mon Oct 26, 2015 6:32 pm

Return to DAVID Development

Who is online

Users browsing this forum: No registered users and 0 guests