Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by the end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

SLS Coming together...

Problems, solutions and discussion about scanning with a video projector and stripe patterns.

SLS Coming together...

Postby dklassen » Tue Apr 07, 2015 11:25 pm

Also have a new laptop coming this week. Just need to acquire the David license and I should be ready to go.
Attachments
IMG_2721.JPG
Acer Aspire V15 laptop w/ 8g ram / Windows 10, Acer K132, DFK 42BUC03, Computar Megapixel 2/3 12mm, David 4.0, V-Slot 1000x20x40 linear rail, Cam and Projector mounts by JDM Dyno.
User avatar
dklassen
 
Posts: 64
Joined: Sun Mar 22, 2015 3:36 pm
Location: Spring Hill, TN

Re: SLS Coming together...

Postby micr0 » Wed Apr 08, 2015 12:16 am

Looks good. Let us know how your scans with that projector work out. I had a K330 and it didn't work well for me. I replaced it with an Optoma ML550 with much better results. See this http://forum.david-3d.com/viewtopic.php?f=15&t=6348&hilit=optoma for a few examples of what I'm talking about.
µ
micr0
 
Posts: 315
Joined: Wed Mar 19, 2014 3:54 pm
Location: NYC

Re: SLS Coming together...

Postby dklassen » Wed Apr 08, 2015 12:32 am

Thanks, I'll do that. Basically using the same hardware as JDM Dyno here in the boards. In fact the camera and projector mount design and STL's came from him.
Acer Aspire V15 laptop w/ 8g ram / Windows 10, Acer K132, DFK 42BUC03, Computar Megapixel 2/3 12mm, David 4.0, V-Slot 1000x20x40 linear rail, Cam and Projector mounts by JDM Dyno.
User avatar
dklassen
 
Posts: 64
Joined: Sun Mar 22, 2015 3:36 pm
Location: Spring Hill, TN

Re: SLS Coming together...

Postby dklassen » Thu Apr 09, 2015 9:25 pm

Getting closer. Going to fire it up tonight for the first time, run through the setup and calibration and see if i can get a first scan.
Attachments
IMG_2725.JPG
Acer Aspire V15 laptop w/ 8g ram / Windows 10, Acer K132, DFK 42BUC03, Computar Megapixel 2/3 12mm, David 4.0, V-Slot 1000x20x40 linear rail, Cam and Projector mounts by JDM Dyno.
User avatar
dklassen
 
Posts: 64
Joined: Sun Mar 22, 2015 3:36 pm
Location: Spring Hill, TN

Re: SLS Coming together...

Postby dklassen » Fri Apr 10, 2015 6:36 pm

First scan. Can't do much as I don't have my license yet but it looks promising at least from my extremely limited knowledge of scanning.
Attachments
2015-04-10_12-26-08.png
Acer Aspire V15 laptop w/ 8g ram / Windows 10, Acer K132, DFK 42BUC03, Computar Megapixel 2/3 12mm, David 4.0, V-Slot 1000x20x40 linear rail, Cam and Projector mounts by JDM Dyno.
User avatar
dklassen
 
Posts: 64
Joined: Sun Mar 22, 2015 3:36 pm
Location: Spring Hill, TN

Re: SLS Coming together...

Postby dklassen » Thu Apr 16, 2015 2:29 am

First complete scan. The scanned object was actually a 3D print.
Attachments
zombie hunter.png
Acer Aspire V15 laptop w/ 8g ram / Windows 10, Acer K132, DFK 42BUC03, Computar Megapixel 2/3 12mm, David 4.0, V-Slot 1000x20x40 linear rail, Cam and Projector mounts by JDM Dyno.
User avatar
dklassen
 
Posts: 64
Joined: Sun Mar 22, 2015 3:36 pm
Location: Spring Hill, TN

Re: SLS Coming together...

Postby dklassen » Sat Apr 18, 2015 3:13 am

Acer Aspire V15 laptop w/ 8g ram / Windows 10, Acer K132, DFK 42BUC03, Computar Megapixel 2/3 12mm, David 4.0, V-Slot 1000x20x40 linear rail, Cam and Projector mounts by JDM Dyno.
User avatar
dklassen
 
Posts: 64
Joined: Sun Mar 22, 2015 3:36 pm
Location: Spring Hill, TN


Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 0 guests