Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by the end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

Rotary 4 DavidSLS 3.9.1.4092 StepperBee

Rotary 4 DavidSLS 3.9.1.4092 StepperBee

Postby oddamann » Mon Dec 16, 2013 12:43 am

Software and VB all for StepperBee kit

Win7 compatible

Manual inside zip-file

Best regard's
oeSoeraa

if somethings wrong -please email me
post@artsound.no

R4D Wi7 and XP.zip
Software
(1.04 MiB) Downloaded 257 times

Manual.zip
(2.84 MiB) Downloaded 328 times

R4D VB all.zip
VisualBasic Files
(1.3 MiB) Downloaded 258 times
oddamann
 
Posts: 15
Joined: Fri Mar 13, 2009 12:28 am

Re: Rotary 4 DavidSLS 3.9.1.4092 StepperBee

Postby oddamann » Mon Dec 16, 2013 10:09 am

I was looking inside forum
viewtopic.php?f=9&t=5895

Problem with vibration.

http://learn.adafruit.com/adafruit-moto ... pper-class


The Steppermotor go 1.8 degree each step and that's what couse the vibration.
With Microstepping this will be smoothed.

I will order Arduino and dive into it...

The stepperbee work's ok but there is a lot of vibration
There is a setting for Stepperbee - FullStep or Wave but there's no difference with the settings
maybe something is missing with coding. I will look into it...

best regard's
oeSoeraa
oddamann
 
Posts: 15
Joined: Fri Mar 13, 2009 12:28 am

Re: Rotary 4 DavidSLS 3.9.1.4092 StepperBee

Postby oddamann » Thu Dec 19, 2013 9:55 pm

Here is a new R4D there was a bug with the "Set" button
but it did not got any better

got answer from seller of stepperbee
the FullStep energize two coils and make it all stronger
the wave energize one coil
no microstepping.

Here is also a manual in pdf - not everyone have word...

RotaryBee4DavidSLS.zip
(28.11 KiB) Downloaded 236 times

Manual.pdf
(2.46 MiB) Downloaded 457 times


the "Checked when start" is to prevent start when when changing window in David to ModeSL
so when you want to "get number when DoDavid" you need to uncheck "Checked when start"
(else it does check and uncheck by itself -)
oddamann
 
Posts: 15
Joined: Fri Mar 13, 2009 12:28 am

Re: Rotary 4 DavidSLS 3.9.1.4092 StepperBee

Postby oddamann » Sat Dec 28, 2013 9:42 am

oddamann
 
Posts: 15
Joined: Fri Mar 13, 2009 12:28 am


Return to Hardware

Who is online

Users browsing this forum: No registered users and 0 guests

cron