DAVID-Laserscanner Forum

Incredibly Low-Cost 3D Scanner for Everyone...

Skip to content

Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Hunka Tibor 3D print

Post a reply

Hunka Tibor 3D print

Postby hunkatibor2 » Wed Feb 13, 2013 12:28 pm

Hi
Completed the board model, making the resin bond I can test.
Tibor
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Wed Feb 13, 2013 12:44 pm

Hi
Attachments
001.jpg
002.jpg
003.jpg
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Wed Feb 13, 2013 12:45 pm

Hi
Attachments
004.jpg
005.jpg
006.jpg
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby GeoffT » Thu Feb 14, 2013 3:59 pm

Tibor, I think it was a very good idea to build a test rig. Resin bonding issues seem to dominate discussion about these builds particularly on the B9creator support forum. The potential for excellent results has already been very well demonstrated by Walter and I'm planning to build a dlp printer myself. The issue that concerns me most is stopping the resin bonding to the base or sides of the tank, ideally finding a technique that doesn't require re-coating too frequently.
GeoffT
 
Posts: 17
Joined: Thu Jul 15, 2010 6:57 pm
Location: Cornwall UK
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Thu Feb 14, 2013 4:19 pm

Hi Geofft
like to try different light and resin. Exciting and air bubbles stick to the topic was also addressed. You treat the VAT as container.??
Tibor
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Sat Feb 16, 2013 5:00 pm

Hi Davidias3Dprint
I experiment in the LCD panel. DLP is not for illumination.
Tibor
Attachments
007.JPG
LCD Panel
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Wed Feb 20, 2013 10:04 am

Hi
I started building my printer.
Tibor :D :D :D
Attachments
002.JPG
3D printer resin
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Sun Feb 24, 2013 9:20 am

Hi
But I still think light through the LCD panel
Tibor
Attachments
003.JPG
004.JPG
005.JPG
Resin 20 mikron
Last edited by hunkatibor2 on Sun Feb 24, 2013 9:23 am, edited 1 time in total.
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Sun Feb 24, 2013 9:21 am

Hi
Attachments
006.JPG
008.JPG
LCD panel + Laser
002.JPG
Full Hardver
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Tue Feb 26, 2013 11:15 am

Completed the first pilot to light with resin
Attachments
001.JPG
halogen lamp
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Thu Feb 28, 2013 1:49 pm

Hi
Attachments
005.JPG
007.JPG
008.JPG
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Thu Feb 28, 2013 1:51 pm

Hi
It has been proven through the illumination of the LCD panel is not bound to the resin.
Therefore, I started Bc9 systematically constructed.
Tibor
Attachments
009.JPG
010.JPG
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby Khalid Khattak » Mon Mar 04, 2013 6:03 pm

good progress.. pls post more picture...
PC: Dell Inspiron i3, 2.27GHz,4GB RAM,64 bit windows 7
CAMERA:
David CCD Mono USB
LASER:
David 5mW Green line laser
PROJECTOR:
3D LED Mini Projector 250lumens, Native 1024x600
[b]http://free3dscans.blogspot.com/
Khalid Khattak
 
Posts: 942
Joined: Thu Apr 23, 2009 1:30 pm
Location: Pakistan
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Mon Mar 11, 2013 5:33 pm

Hi
Ready to mount.!!
Tibor
Attachments
008.JPG
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: Hunka Tibor 3D print

Postby hunkatibor2 » Sat Apr 20, 2013 12:21 pm

hi
http://www.indiegogo.com/projects/muve-1-3d-printer-open-uv-resin-based-3d-printer
Image
Tibor
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top
Next
Post a reply

Return to 3D Printing

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
cron