Scan your face!

Anything that doesn't fit the other topics should go here.

Postby Simon » Mon May 05, 2008 7:24 pm

@Thierry: fantastic face scans. Thanks for sharing with us!
User avatar
Simon
Administrator
 
Posts: 421
Joined: Sun Jan 21, 2007 3:40 pm
Location: Braunschweig - Germany

Postby thierr_cnc » Mon May 05, 2008 8:30 pm

Hello Simon

I'm a bit comfused by your thanks...

I think the opposite would be more right !

Thank for you and swen to share cost free your amazing software !!!


I'm working on 3D milling of my scans i'l show you the result soon...

Regards

Thierry
User avatar
thierr_cnc
 
Posts: 31
Joined: Mon Mar 31, 2008 8:41 pm
Location: france

Re: Scan your face!

Postby WalterMo » Tue Feb 23, 2010 7:54 pm

Hi,
A planeless scan and a Flash presentation of the new, just by Sven created shader "Carved look".
viewtopic.php?f=4&p=10864#p10864

Walter




User avatar
WalterMo
Moderator
 
Posts: 2249
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Postby hal » Tue Feb 23, 2010 9:53 pm

Hello Walter,

the new shader looks great. And your face-scan is perfect: you are a really pirate of 3D scanning. :wink:
Compliments and bye,
Mattia

p.s.: sorry a question: how many scans you need for this work? Maybe 5 or 6, right? And how many time is required for one scan?
Thanks
User avatar
hal
Moderator
 
Posts: 1467
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: Scan your face!

Postby WalterMo » Wed Feb 24, 2010 9:24 am

Hi Mattia,

This scan was made some time ago and because it isn't very good, I had put it in a drawer. But now with Sven's new FLASH shader look, I thought it would be a possibility to bring it out again. What I will say is, I don't remember well all the used settings. :oops:

The cam resolution was 640x480 pixels at 30fps. And I think the clock rate was switched to position 5 at my controller. I have just repeated such a laser sweep and it is about 50 sec.

I think the number of scans was 5.

Pirate Walter

P.S.: You know, a real pirate has to have cicatrices. Also on the back.
User avatar
WalterMo
Moderator
 
Posts: 2249
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Living Animal Scans

Postby hal » Sat Oct 16, 2010 8:47 pm

Hello,

ok, this isn't a "face", but a muzzle.
Is a fusion of 4 quick scans, just to avail the opportunity during the sleeping time of my cat, Gastone.
The little flat area on the head isn't a scan error but the shaved fur: Gastone is an active cat and every time fight with the other cats of the neighbours (damn!). So sometimes he came back with scars.

MatM_Gastone Oct 2010.jpg
Gastone, October 2010

Scanned with the green laser light from DavidShop (focusable at 5 mW) at a distance of 90 cm (35,4 inches).

Miao,
Mattia
PC: DELL M90, Intel T7200, 4 Gb Ram, nVidia Quadro 3500FX.
SO: Win 7 64Bit.
CAMs: USB CCD Color (1024x768, 30 fps) & Canon EOS 1000D.
LENS: 12 mm & VariFocal 3,5-8 mm.
PROJECTOR: ACER K11 & DELL M110.
LASERS: 5mW and 16 mW.
User avatar
hal
Moderator
 
Posts: 1467
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: Scan your face!

Postby Khalid Khattak » Sun Oct 17, 2010 6:15 am

Cool Mattia.. In case your Cat opens eyes ;)...
:mrgreen: :mrgreen: Thanks for sharing.. :roll:
PC: Dell Inspiron i3, 2.27GHz,4GB RAM,64 bit windows 7
CAMERA:
David CCD Mono USB
LASER:
David 5mW Green line laser
PROJECTOR:
3D LED Mini Projector 250lumens, Native 1024x600
[b]http://free3dscans.blogspot.com/
Khalid Khattak
 
Posts: 930
Joined: Thu Apr 23, 2009 1:30 pm
Location: Pakistan

Re: Scan your face!

Postby Bongobat » Sat Mar 05, 2011 12:53 pm

Better late than never :oops:

Here is my face :D

Quick Planeless scan test with my new scanner rig, DX laser, and Phillips SPC900NC webcam.

Rendered with some dramatic lighting in Maya.

Greg
Attachments
Scan of me.jpg
modelandme.jpg
Model next to actual picture of me
Last edited by Bongobat on Sun Mar 06, 2011 8:20 am, edited 1 time in total.
Reason: Added a comparison picture between model and me (being cool lol)
DealExtreme red line laser, Microsoft Lifecam HD-5000
User avatar
Bongobat
Moderator
 
Posts: 1002
Joined: Mon Apr 02, 2007 10:02 am
Location: Ohio, USA

Re: Scan your face!

Postby hal » Sat Mar 05, 2011 1:14 pm

:shock:
Wow, it is a great scan! Only some waves, but very cool, compliments!

Mattia

Edit: thanks for posting the photo, too. After long time, finally we can see your face, and looking in your eyes when we are writing to you... no!, damn, you have black sunglasses! :lol: :D
User avatar
hal
Moderator
 
Posts: 1467
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: Scan your face!

Postby Bongobat » Sat Mar 05, 2011 1:59 pm

Thanks Mattia,

I made the scans with the SPC900NC running at 60 FPS and the rig swept my face in 35 seconds, Also the intersection angle started at something like 29 degrees and dropped off which is not an ideal angle for planeless scanning. I did not use any smoothing the result here is straight from shapefusion. Maybe with a little more patience I could have eliminated all waves but it was hard to sit still very long :oops: . I scanned at a resolution of 640 X 480 7 scans but I was on a computer without a full version of David and saved at the lower resolution and then fused those on a different computer to this.

Again just a quick test using some cheap hardware.

P.S That's not my real neck.

Greg
DealExtreme red line laser, Microsoft Lifecam HD-5000
User avatar
Bongobat
Moderator
 
Posts: 1002
Joined: Mon Apr 02, 2007 10:02 am
Location: Ohio, USA

Re: Scan your face!

Postby Ben4096 » Sun Mar 06, 2011 2:35 am

That's a nice one !
Maybe I'm missing something but why 35sec ? If you scan at 60fps and 480p it could be much less, no ?

Ben
http://paranoidpuppets.com/
Ben4096
 
Posts: 53
Joined: Tue Sep 29, 2009 12:42 am
Location: Paris / France

Re: Scan your face!

Postby Bongobat » Sun Mar 06, 2011 4:02 am

Hi Ben,

Yes, If I was using a calibration corner this could have been faster but I've found when doing planeless scans the slower the reference the better the quality of the repetition.

Greg
DealExtreme red line laser, Microsoft Lifecam HD-5000
User avatar
Bongobat
Moderator
 
Posts: 1002
Joined: Mon Apr 02, 2007 10:02 am
Location: Ohio, USA

face scanning

Postby tube » Sat Mar 26, 2011 8:11 pm

hi
150mm negativ corner
Scanning Without Panels
4 scanns - fusion in david
cleaning with Sculptris
rendering in Rhino

Frank

Edit by Mattia: moved into this discussion, more fitted with the theme of the post.
Attachments
face_rhino_render.jpg
User avatar
tube
 
Posts: 31
Joined: Tue Jun 29, 2010 12:47 pm
Location: Germany - Nauen

Re: face scanning

Postby will_I_am » Sun Mar 27, 2011 4:34 am

wow! great job
will_I_am
 
Posts: 5
Joined: Sat Mar 28, 2009 12:24 am

Re: Scan your face!

Postby Khalid Khattak » Sun Oct 14, 2012 7:19 am

Hello, need more faces :) :lol: mine coming soon...
PC: Dell Inspiron i3, 2.27GHz,4GB RAM,64 bit windows 7
CAMERA:
David CCD Mono USB
LASER:
David 5mW Green line laser
PROJECTOR:
3D LED Mini Projector 250lumens, Native 1024x600
[b]http://free3dscans.blogspot.com/
Khalid Khattak
 
Posts: 930
Joined: Thu Apr 23, 2009 1:30 pm
Location: Pakistan

Previous

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 0 guests