Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

Guppy GF 080 C camera

Guppy GF 080 C camera

Postby RutsT » Fri Mar 21, 2014 4:00 pm

Hi david community

I have 2 HD cameras (Guppy GF 080 C from Allied Vision Technologie) available. These camera's work via FireWire (IEEE 1394). I just plugged in this camera and when I opened DAVID they didn't show up between my camera's. I know they have to be compatible with the DirectShow driver (and I already did guess they were not compatible) that DAVID uses, but I was wondering how I could be sure this is the problem?

Posts: 4
Joined: Tue Mar 11, 2014 1:41 pm

Re: Guppy GF 080 C camera

Postby hunkatibor2 » Fri Mar 21, 2014 5:22 pm

I have a firewire camera. It comes with an adapter card that comes installed on the device manager, so only recognize David. What is a PC hardware info?
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest