Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Alternative solutions to drive the rotation

Alternative solutions to drive the rotation

Postby hunkatibor2 » Sun Jan 12, 2014 4:42 pm

Hi Sven
This hardware could handle the instructions of David?
http://www.planet-cnc.com/index.php?page=hardware
Tibor
Image
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Alternative solutions to drive the rotation

Postby tube » Wed Jan 15, 2014 8:31 am

Hi Tibor,

I have CNC USB controller Mk2/4 (4 axis) from http://www.planet-cnc.com/index.php?page=shop
I use the software and the controller for my CNC mill and am satisfied
API for Mk2 and Mk2/4 is available http://forum.planet-cnc.com/viewtopic.php?p=4171#p4171 but I've never tested the API.

Frank
User avatar
tube
 
Posts: 32
Joined: Tue Jun 29, 2010 12:47 pm
Location: Germany - Tremmen

Re: Alternative solutions to drive the rotation

Postby hunkatibor2 » Wed Jan 15, 2014 11:16 am

Hi Frank
Thank you, but I do not understand the electronics, especially for programming. In my country are beginning to inquire towards the USB. I'll get in touch with professionals.
Tibor
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary


Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron