Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

DIY laser line module

DIY laser line module

Postby florin.topala » Sun Mar 09, 2008 5:46 pm

hellow everybody

what do you think about the modules snd optics from
http://www.laserex.net/default.htm

it is ok to do a cheeper module for a line laser?

thanks
florin.topala
 
Posts: 104
Joined: Mon Feb 19, 2007 12:47 am
Location: Timisoara, Romania

Postby florin.topala » Thu Mar 27, 2008 6:13 pm

it is not my post soo ...
soory

I have mede a focusable laser line from a laser line (wichi I have burned) and a laser pointer
Attachments
P1000138.JPG
P1000137.JPG
P1000136.JPG
florin.topala
 
Posts: 104
Joined: Mon Feb 19, 2007 12:47 am
Location: Timisoara, Romania

Postby florin.topala » Thu Mar 27, 2008 6:14 pm

next img
Attachments
P1000140.JPG
P1000141.JPG
P1000142.JPG
florin.topala
 
Posts: 104
Joined: Mon Feb 19, 2007 12:47 am
Location: Timisoara, Romania

re

Postby humanticnc » Thu Mar 27, 2008 6:25 pm

Hi florin.topala




He is very beautiful work. Be kind put a picture in from the working line
Pc Hardware : AMD Sepron 2800 2.1 GHz 1 GB RAM
Cam : Microszoft LifeCam VX- 6000
Laser : 5 Mw Red pointer glass pole you are green laser Mattia timer clock
User avatar
humanticnc
 
Posts: 444
Joined: Sun Sep 30, 2007 7:42 pm
Location: Hungary Szentmártonkáta

Postby florin.topala » Thu Mar 27, 2008 6:43 pm

final result & line ... it is not quite linear (because I didn't centrate the lens enough)
Attachments
P1000144.JPG
P1000146.JPG
florin.topala
 
Posts: 104
Joined: Mon Feb 19, 2007 12:47 am
Location: Timisoara, Romania

re

Postby humanticnc » Fri Mar 28, 2008 9:35 am

When you start it the scanning
Pc Hardware : AMD Sepron 2800 2.1 GHz 1 GB RAM
Cam : Microszoft LifeCam VX- 6000
Laser : 5 Mw Red pointer glass pole you are green laser Mattia timer clock
User avatar
humanticnc
 
Posts: 444
Joined: Sun Sep 30, 2007 7:42 pm
Location: Hungary Szentmártonkáta

Postby florin.topala » Fri Mar 28, 2008 11:29 am

Last night I've scanned a tooth but I have some problems with combining the messhes
I hope I can give u some results today

@ Simon the first post isn't mine could you put the origianl author?
tx
florin.topala
 
Posts: 104
Joined: Mon Feb 19, 2007 12:47 am
Location: Timisoara, Romania

Postby florin.topala » Sat Mar 29, 2008 7:28 pm

some results
Attachments
01.jpg
02.jpg
qw02.jpg
the mesh was smoothed
florin.topala
 
Posts: 104
Joined: Mon Feb 19, 2007 12:47 am
Location: Timisoara, Romania

re

Postby humanticnc » Mon Mar 31, 2008 9:17 am

HI Davidias
The fish succeeded today reel clock to test , and in clear one to prepare a uptake .
Pc Hardware : AMD Sepron 2800 2.1 GHz 1 GB RAM
Cam : Microszoft LifeCam VX- 6000
Laser : 5 Mw Red pointer glass pole you are green laser Mattia timer clock
User avatar
humanticnc
 
Posts: 444
Joined: Sun Sep 30, 2007 7:42 pm
Location: Hungary Szentmártonkáta

re

Postby humanticnc » Mon Mar 31, 2008 9:19 am

Foto
Attachments
ketyegos5.jpg
Pc Hardware : AMD Sepron 2800 2.1 GHz 1 GB RAM
Cam : Microszoft LifeCam VX- 6000
Laser : 5 Mw Red pointer glass pole you are green laser Mattia timer clock
User avatar
humanticnc
 
Posts: 444
Joined: Sun Sep 30, 2007 7:42 pm
Location: Hungary Szentmártonkáta

re

Postby humanticnc » Mon Mar 31, 2008 9:33 am

foto
Attachments
ketyegos7.jpg
Pc Hardware : AMD Sepron 2800 2.1 GHz 1 GB RAM
Cam : Microszoft LifeCam VX- 6000
Laser : 5 Mw Red pointer glass pole you are green laser Mattia timer clock
User avatar
humanticnc
 
Posts: 444
Joined: Sun Sep 30, 2007 7:42 pm
Location: Hungary Szentmártonkáta

Postby florin.topala » Mon Mar 31, 2008 9:53 pm

@ humanticnc
niice,

when we use a chicken timmer ... it is like we are usiinga a wall clock and the laser is fixed on minute arm. I think it will be a good idea to fix it on the hour arm
esspecialy for small objects

:)
have a nice week
florin.topala
 
Posts: 104
Joined: Mon Feb 19, 2007 12:47 am
Location: Timisoara, Romania

re

Postby humanticnc » Wed Apr 09, 2008 7:25 pm

HI florin.topala




the wall clock construction you made it ??
Pc Hardware : AMD Sepron 2800 2.1 GHz 1 GB RAM
Cam : Microszoft LifeCam VX- 6000
Laser : 5 Mw Red pointer glass pole you are green laser Mattia timer clock
User avatar
humanticnc
 
Posts: 444
Joined: Sun Sep 30, 2007 7:42 pm
Location: Hungary Szentmártonkáta

Postby florin.topala » Wed Apr 09, 2008 9:06 pm

not yet :(
I didn't find a suitable clock to dismantle
:(


I will buy a clock (mecanical one)
and I want to use it for smaall objects :)

aprox 1 cm

as soon I will do it I will post it
florin.topala
 
Posts: 104
Joined: Mon Feb 19, 2007 12:47 am
Location: Timisoara, Romania

Postby MagWeb » Wed Apr 09, 2008 9:57 pm

Hi Florin,

maybe I´m wrong, but it should make no difference whether you scan a small or big object if you rotate the laser.
A normal kitchen timer does 90° in 15 min. We need about 30° to do a scan, means 5 min kitchen clock movement. That should be sufficient to enlight every horizontal camline without smearing.

The either problem of small objects is their relation to the width of the laserline - but there might be some "oversampling effects"....- please report.

Gunter
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Next

Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron