Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by the end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

Problems with the Update DAVID_Setup_4.5.3.1374

Problems with the Update DAVID_Setup_4.5.3.1374

Postby Print3d Support » Wed Sep 28, 2016 10:44 pm

hello, we are Print 3d Colombia sas, a client of us have a problem with the camera scanner david sls 4. About 6 months ago he has the scanner, he scanned with excellent results, the problem started when he update the program to (DAVID_Setup_4.5.3.1374.exe). from this moment the scanner models took very clearly and did not allow scanning, he try to return to the oldest version and it did not work. he has a windows 7 64 bit. i attach dome photos with the problem.

the customer has made configuration changes to the software and nothing has worked, made the switch from Y800 to RGB24 in the settings of the camera and does not work, the camera after the update remain emitting a very bright pattern that does not allow to scan anything. The rainbow pattern is generated by the camera of the cellphone client. he attempt to return to the older versions of the program, but did not work.

please help me with this, Thanks for all.

Sergio Alejandro Diaz.
Gerente Operativo
Print3D Colombia S.A.S.
Cel: 315 203 3693
Print3d Support
Posts: 1
Joined: Tue Sep 27, 2016 2:05 am

Return to Software

Who is online

Users browsing this forum: No registered users and 1 guest