Hi, today I updated my usb David 3.x to the recommended new version I received from David newsletter.
I haven't used David in a number of months and decided to check out any new features or whatever but noticed that most of the UI is in German.
Is there anyway to change that to English?
Thank you
DAVID-Laserscanner Forum
Incredibly Low-Cost 3D Scanner for Everyone...
Dear DAVID Community,
As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.
To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums
As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.
To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums
Default User Interface language
9 posts
• Page 1 of 1
Default User Interface language
by TonyBalony » Tue Oct 16, 2012 7:19 pm
- TonyBalony
- Posts: 4
- Joined: Wed Aug 03, 2011 10:44 pm
Re: Default User Interface language
by WalterMo » Tue Oct 16, 2012 9:50 pm
Yes you can change to English:
At top right you will find 'Einstellungen' (=settings). Then click on 'Sprache' (=language). After this change DAVID must be restarted.
At top right you will find 'Einstellungen' (=settings). Then click on 'Sprache' (=language). After this change DAVID must be restarted.
-
WalterMo - Moderator
- Posts: 2363
- Joined: Mon Apr 02, 2007 6:52 pm
- Location: Braunschweig, Germany
Re: Default User Interface language
by Sven » Wed Oct 17, 2012 6:56 pm
When started for the first time, DAVID uses the system language settings. Should be English or French in your country... When the language is not available, DAVID will use English. I wonder why that did not work in your case.
Anyone else have that problem?
Sven
Anyone else have that problem?
Sven
-
Sven - DAVID Developer
- Posts: 1541
- Joined: Mon Jan 22, 2007 8:59 am
- Location: Braunschweig, Germany
Re: Default User Interface language
by pottersfriend » Wed Oct 17, 2012 10:05 pm
I ran into the same problem where it started in German. Easy enough to fix but threw me for a loop initially.
Darin
Darin
- pottersfriend
- Posts: 153
- Joined: Wed Jun 03, 2009 1:49 am
- Location: Washington State, USA
Re: Default User Interface language
by Sven » Thu Oct 18, 2012 2:35 pm
Thanks for your reports.
Indeed there was a bug in the 3.5.1 setup installer which made DAVID start in German.
We have fixed that.
Details: The language setting is stored in DAVID in /Settings/Language.xml. If that file does not exist, DAVID uses the system language (at this time, only German or English), and English by default.
The bug was that the setup installer created a Language.xml file with the setting "German" IN ANY CASE.
Thanks
Sven
Indeed there was a bug in the 3.5.1 setup installer which made DAVID start in German.
We have fixed that.Details: The language setting is stored in DAVID in /Settings/Language.xml. If that file does not exist, DAVID uses the system language (at this time, only German or English), and English by default.
The bug was that the setup installer created a Language.xml file with the setting "German" IN ANY CASE.
Thanks
Sven
-
Sven - DAVID Developer
- Posts: 1541
- Joined: Mon Jan 22, 2007 8:59 am
- Location: Braunschweig, Germany
Re: Default User Interface language
by Sven » Thu Oct 18, 2012 4:28 pm
How to switch to English:
Delete the file "Language.xml" in the "Settings" subfolder of your DAVID3 installation
- OR -
Click here (as Walter described above), then restart DAVID:
Sven
Delete the file "Language.xml" in the "Settings" subfolder of your DAVID3 installation
- OR -
Click here (as Walter described above), then restart DAVID:
- How to switch from German to English
Sven
-
Sven - DAVID Developer
- Posts: 1541
- Joined: Mon Jan 22, 2007 8:59 am
- Location: Braunschweig, Germany
Re: Default User Interface language
by Austin » Fri Oct 19, 2012 3:32 am
Sven wrote:Thanks for your reports.
Indeed there was a bug in the 3.5.1 setup installer which made DAVID start in German.
Details: The language setting is stored in DAVID in /Settings/Language.xml. If that file does not exist, DAVID uses the system language (at this time, only German or English), and English by default.
The bug was that the setup installer created a Language.xml file with the setting "German" IN ANY CASE.
Thanks
Sven
Can you add ChineseSimplified to the Language.xml in the next version, Sven?
Or,Can I make it by myself?And ,how?
Thanks
Austin
Lenovo T420:intel i7-2640M,4GB RAM;Acer K11;Imaging Source DMK 23G445,DMx 41BUC02+Pentax H614M,Pentax C2514-M
- Austin
- Posts: 100
- Joined: Fri May 04, 2012 4:40 am
- Location: Guangdong,China
Re: Default User Interface language
by TonyBalony » Fri Oct 19, 2012 4:16 am
WalterMo wrote:Yes you can change to English:
At top right you will find 'Einstellungen' (=settings). Then click on 'Sprache' (=language). After this change DAVID must be restarted.
Thank you WalterMo...all is good now.
- TonyBalony
- Posts: 4
- Joined: Wed Aug 03, 2011 10:44 pm
Re: Default User Interface language
by Sven » Thu Oct 25, 2012 3:52 pm
Austin wrote:Can you add ChineseSimplified to the Language.xml in the next version, Sven?
Or,Can I make it by myself?And ,how?
Hi Austin,
We are working with our foreign resellers to get more languages. Chinese will be among them in one of the next versions!
(But no, you cannot make it yourself)
Sven
-
Sven - DAVID Developer
- Posts: 1541
- Joined: Mon Jan 22, 2007 8:59 am
- Location: Braunschweig, Germany
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest