Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

old car lens scan and 3D print ( Guess the Car )

Anything that doesn't fit the other topics should go here.

Re: old car lens scan and 3D print ( Guess the Car )

Postby Jonathan_SA » Sat Jan 02, 2016 12:38 pm

Yup, I recon that a rear indicator lens of a Ford Anglia 105E? Good job on the scan
Jonathan_SA
 
Posts: 3
Joined: Wed Jul 15, 2009 3:39 am
Location: Auckland, New Zealand

Re: old car lens scan and 3D print ( Guess the Car )

Postby 3dtech » Thu Mar 17, 2016 10:36 am

thanks for this information.
T-Glase Specification [ taulman3D t-glase ]

Pyrolysis Termal Degradation : 287°C
Flexural Strength: 48.0 MPa
Tensile Strength : 71MPa
Max Elongation at break : 226%
Standard Tolerance : ± 0.1mm
Layer Thickness : .2mm -.25mm
Melting Temprature : 207°C
Shrinkage-in/in : 0.0028
Density : 1.134g/cc
Opacity : 6%
Reflectivity : 5-8%

What Is T-Glase Material?
T-Galse, short for Tough Glass, this new and unique material has some very interesting characteristics with regars to clearness and strength. It is made from the best optical quality PETG material. Unlike other polymers, some PETG, including T-Glase aren't considered 'transparent'. Rather, it belongs to a grouping of polymers that are considered 'colorless' and or 'colorless with a percentage of reflectivity'.T-Glase is additionally considered 'water-clear' and 'optically correct'.
3d printing service india
thanks for this information.
visit: http://vexmatech.com
3dtech
 
Posts: 8
Joined: Tue Jan 19, 2016 7:54 am

Previous

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 9 guests

cron