Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

My sample 3d scanner ^o^

Anything that doesn't fit the other topics should go here.

My sample 3d scanner ^o^

Postby moscamara » Tue Sep 30, 2014 6:47 pm

Special Thank you To:
hal , WalterMo , milz , MagWeb, hunkatibor2 , JDM Dyno , NARMELLA , MayCrown , Christian_Mendez , k_thod
Thank you for your private message and help me answer in my topic.
^__^

My equipment
1. Logitech pro9000 modify
2. Computar M1214-MP2
3. Acer K137
4. Asus G750JM

Close hole , Topology , Render in Zbrush
Attachments
sample1.jpg
moscamara
 
Posts: 55
Joined: Mon Jul 14, 2014 1:28 am

Re: My sample 3d scanner ^o^

Postby moscamara » Tue Sep 30, 2014 6:54 pm

This is very hard to scan. I spend time to scan about 1 day :cry: :cry:
Attachments
sample2.jpg
moscamara
 
Posts: 55
Joined: Mon Jul 14, 2014 1:28 am

Re: My sample 3d scanner ^o^

Postby moscamara » Tue Sep 30, 2014 7:05 pm

The real material is stone. It very hard to scan it well.
I coat it with dulling spray. :D :D
Attachments
sample3.jpg
moscamara
 
Posts: 55
Joined: Mon Jul 14, 2014 1:28 am

Re: My sample 3d scanner ^o^

Postby moscamara » Tue Sep 30, 2014 7:10 pm

This is the last one. :D :D
Attachments
sample4.jpg
moscamara
 
Posts: 55
Joined: Mon Jul 14, 2014 1:28 am

Re: My sample 3d scanner ^o^

Postby NARMELLA » Tue Sep 30, 2014 8:51 pm

Hi,
Really nice scans.

Good luck
NARMELLA
Data projector : NEC VE 281
Camera(s) : Canon eos 600D (3x)
Software : Lets scan 2.5 + David laser scanner 3.9
گشتاور صنعت تبریز
User avatar
NARMELLA
 
Posts: 354
Joined: Thu May 29, 2014 9:18 am

Re: My sample 3d scanner ^o^

Postby JDM Dyno » Tue Sep 30, 2014 9:32 pm

lookin good!!

glad your getting on well :-)
Camera's: 2 x DFK 42BUC03 Duel Camera,
c615 modified with Computar megapixel lens
lenses: 2 x Pentax 12mm, 2 x Computar 8mm
Optoma ML300 Projector
Turntable

www.jdm-dyno.co.uk
User avatar
JDM Dyno
 
Posts: 185
Joined: Sat May 10, 2014 9:32 pm
Location: England

Re: My sample 3d scanner ^o^

Postby hunkatibor2 » Wed Oct 01, 2014 6:23 am

Hi
These jewelry?
Tibor :D :D :D
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: My sample 3d scanner ^o^

Postby moscamara » Wed Oct 01, 2014 12:31 pm

hunkatibor2 wrote:Hi
These jewelry?
Tibor :D :D :D


The original items is not jewelry.
:D :D

Tibor
I found much angle between camera , projector make hard to scan (but low horizontal line noise). Now i use 38degree but i will test to decrease the angle.
moscamara
 
Posts: 55
Joined: Mon Jul 14, 2014 1:28 am

Re: My sample 3d scanner ^o^

Postby moscamara » Wed Oct 01, 2014 12:32 pm

NARMELLA wrote:Hi,
Really nice scans.

Good luck
NARMELLA


Thank you NARMELLA. :D :D
moscamara
 
Posts: 55
Joined: Mon Jul 14, 2014 1:28 am

Re: My sample 3d scanner ^o^

Postby moscamara » Wed Oct 01, 2014 12:34 pm

JDM Dyno wrote:lookin good!!

glad your getting on well :-)


Thank you JDM Dyno , My macro scan is not start setup. I still waiting for equipment from ebay. :cry: :cry:
moscamara
 
Posts: 55
Joined: Mon Jul 14, 2014 1:28 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests

cron