Hi!! I want to do a micro scan of miniatures with details about 5 milimeters. I have DAVID-CAM-3.1-M and the beamer ACER K132. I´ll buy this lens for the beamer http://xn--przisionsoptiken-wnb.eu/achromat-p-1559.html
Can you recommend me another change? Is my new lens of the beamer correct for these meshes?
Any help is welcome, Thanks!
DAVID-Laserscanner Forum
Incredibly Low-Cost 3D Scanner for Everyone...
Dear DAVID Community,
As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.
To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums
As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.
To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums
Micro Scan
2 posts
• Page 1 of 1
Micro Scan
by Anaolvida » Thu Mar 10, 2016 7:19 pm
- Anaolvida
- Posts: 4
- Joined: Thu Mar 03, 2016 8:14 am
Re: Micro Scan
by WalterMo » Fri Mar 11, 2016 2:05 pm
You intend to scan 5mm small miniatures? Good luck!
Here in this thread you will find some hints of Benoy:
viewtopic.php?f=15&t=4491&p=23046#p23046
and also infos by derHenry where and what lenses and adapters he bought.
For me it seems that the diameter of 22mm of the lens which you have chosen is too small. The beam coming out of the projector is tilted upwards. Maybe it could be cutted by the 22mm lens. Simply test it with a piece of paper, put it at that place where the lens should be fixed later on. Remember that the lens is ca. 10mm thick!
The light intensity of the K132 at that close distance (= small projection area) will be rather high! This could overdrive the sensitity of the camera's aperture. Therefore you have to put a grey filter in front of the camera's lens. Not in front of the projector's lens! The filter could be overheated.
What makes you thinking of 75mm focal length?
Here in this thread you will find some hints of Benoy:
viewtopic.php?f=15&t=4491&p=23046#p23046
and also infos by derHenry where and what lenses and adapters he bought.
For me it seems that the diameter of 22mm of the lens which you have chosen is too small. The beam coming out of the projector is tilted upwards. Maybe it could be cutted by the 22mm lens. Simply test it with a piece of paper, put it at that place where the lens should be fixed later on. Remember that the lens is ca. 10mm thick!
The light intensity of the K132 at that close distance (= small projection area) will be rather high! This could overdrive the sensitity of the camera's aperture. Therefore you have to put a grey filter in front of the camera's lens. Not in front of the projector's lens! The filter could be overheated.
What makes you thinking of 75mm focal length?
-
WalterMo - Moderator
- Posts: 2363
- Joined: Mon Apr 02, 2007 6:52 pm
- Location: Braunschweig, Germany
2 posts
• Page 1 of 1
Return to Laser and Camera Hardware
Who is online
Users browsing this forum: No registered users and 3 guests