Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

c920 users with david 4

Which camera works? Where can you buy an adequate laser? And more...

c920 users with david 4

Postby spacko » Sun Jan 03, 2016 3:02 pm

Hi,
is there anyone using Logitech c920 with David 4?

I am thinkiing about buying
http://www.kurokesu.com/shop/KITC920
and would like to know if anyone is using this setup?

Best
Spacko
spacko
 
Posts: 7
Joined: Mon Nov 02, 2015 9:49 pm

Re: c920 users with david 4

Postby hal » Fri Jan 15, 2016 2:55 pm

Hello, searching in the forum, you can check the user fisa's posts, he had that webcam. Please check also the opinion of Idea Beans user, that isn't happy with that hardware. Please check also users Saulius L and helix_3.
I suggest to give a try to searching forum function, that alwasy give help. :wink:
Best regards,
Mattia
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: c920 users with david 4

Postby tailele » Mon Mar 07, 2016 4:18 pm

Hi, i have two c920 with c mount lens pentax ( fenomenal clnes ) with a case that i build with 3d printer . if you want, i could sell you two or one camera.
Benq w700, hp elitebook 8570w; blackmagic intense shuttle 3.0; nikon D600; Nikon macro 105mm VRII
tailele
 
Posts: 25
Joined: Sat Apr 25, 2009 2:55 pm

Re: c920 users with david 4

Postby tailele » Mon Mar 07, 2016 4:20 pm

Another thing, i have buy the article that you posted, i had some problems with the solder unit; it is complicated....
Benq w700, hp elitebook 8570w; blackmagic intense shuttle 3.0; nikon D600; Nikon macro 105mm VRII
tailele
 
Posts: 25
Joined: Sat Apr 25, 2009 2:55 pm


Return to Laser and Camera Hardware

Who is online

Users browsing this forum: No registered users and 2 guests

cron