Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

c920 users with david 4

Which camera works? Where can you buy an adequate laser? And more...

c920 users with david 4

Postby spacko » Sun Jan 03, 2016 3:02 pm

Hi,
is there anyone using Logitech c920 with David 4?

I am thinkiing about buying
http://www.kurokesu.com/shop/KITC920
and would like to know if anyone is using this setup?

Best
Spacko
spacko
 
Posts: 7
Joined: Mon Nov 02, 2015 9:49 pm

Re: c920 users with david 4

Postby hal » Fri Jan 15, 2016 2:55 pm

Hello, searching in the forum, you can check the user fisa's posts, he had that webcam. Please check also the opinion of Idea Beans user, that isn't happy with that hardware. Please check also users Saulius L and helix_3.
I suggest to give a try to searching forum function, that alwasy give help. :wink:
Best regards,
Mattia
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: c920 users with david 4

Postby tailele » Mon Mar 07, 2016 4:18 pm

Hi, i have two c920 with c mount lens pentax ( fenomenal clnes ) with a case that i build with 3d printer . if you want, i could sell you two or one camera.
Benq w700, hp elitebook 8570w; blackmagic intense shuttle 3.0; nikon D600; Nikon macro 105mm VRII
tailele
 
Posts: 25
Joined: Sat Apr 25, 2009 2:55 pm

Re: c920 users with david 4

Postby tailele » Mon Mar 07, 2016 4:20 pm

Another thing, i have buy the article that you posted, i had some problems with the solder unit; it is complicated....
Benq w700, hp elitebook 8570w; blackmagic intense shuttle 3.0; nikon D600; Nikon macro 105mm VRII
tailele
 
Posts: 25
Joined: Sat Apr 25, 2009 2:55 pm


Return to Laser and Camera Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron