Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Conect other camares to SLS-2

Which camera works? Where can you buy an adequate laser? And more...

Conect other camares to SLS-2

Postby Monica » Thu Dec 03, 2015 10:03 am

Hello,
A few months ago I buy the scanner sls-2 and I'm starting you have to do some testing with.
The thing is I'm trying to connect a faster Camera (> fps) and David do not recognized it.
- Ethernet Basler
- Jai USB3
- USB3 IDS
I've only gotten the IDS camera work, as this has some drivers to make them compatible with DirectShow. Any ideas?
Monica
 
Posts: 3
Joined: Fri Nov 27, 2015 3:14 pm

Re: Conect other camares to SLS-2

Postby hunkatibor2 » Thu Dec 03, 2015 5:24 pm

Hi Monica
Basler driver downloaded and installed?
Tibor
http://www.imgserv.com/images/2015/11/29/EOHb0oZ.jpg
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Conect other camares to SLS-2

Postby drndadoo » Fri Dec 04, 2015 10:58 am

Hi Monica,

under Setup menu > Setup type you have to choose "Structured Light Setup".
If you choose SLS-2 then your camera will not be shown.
drndadoo
DAVID Support
 
Posts: 194
Joined: Tue Mar 24, 2015 3:09 pm

Re: Conect other camares to SLS-2

Postby Monica » Mon Dec 14, 2015 11:11 am

I have already installed all the drivers (the camera is ok using the manufactured program) and also, i have selected the structured light setup and not SLS-2 setup.
Monica
 
Posts: 3
Joined: Fri Nov 27, 2015 3:14 pm

Re: Conect other camares to SLS-2

Postby Monica » Mon Dec 14, 2015 11:22 am

The camera appears in the select list but nothing happens, like It could not open it. The problem may come from the directshow?
Monica
 
Posts: 3
Joined: Fri Nov 27, 2015 3:14 pm


Return to Laser and Camera Hardware

Who is online

Users browsing this forum: No registered users and 2 guests

cron