Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

Green laser noise possible solution

Which camera works? Where can you buy an adequate laser? And more...

Green laser noise possible solution

Postby Absrnd » Mon Apr 20, 2009 9:36 pm

I received my green laser last week, and what a sh*t load of noise did it project :(
but today I had a clear moment, and closely inspected the laser opening with a magnifying glass
MAKE SURE IT'S NOT TURNED ON !!!!! :?

and I saw at the edges of the glass bar some plastic residue that covered the lens a small bit.
I took a very thin scalpel knife and cut it away, the glass is hard enough that it should not be
damaged by the blade.
and I was able to cut a big portion away, this cleared up the noise by 95% :D

so I'm a happy camper, but probably have to rescan everything I have done up ti'll now :(.

I hope this is also a solution for other noise problems users !

.
Absrnd
 
Posts: 8
Joined: Mon Jan 12, 2009 12:50 am

Return to Laser and Camera Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron