Who can help me with Vistax64 Italian
I get this error and I can not find solution
DAVID-Laserscanner Forum
Incredibly Low-Cost 3D Scanner for Everyone...
Dear DAVID Community,
In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.
To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.
In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.
To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.
DAVID_Setup_4.3.5.478 Entry Point Not Found" using Vista 64
4 posts
• Page 1 of 1
DAVID_Setup_4.3.5.478 Entry Point Not Found" using Vista 64
by dental_art » Fri Sep 25, 2015 2:58 pm
- Attachments
-
- dental_art
- Posts: 18
- Joined: Fri Jul 03, 2015 1:16 pm
Re: DAVID_Setup_4.3.5.478 Entry Point Not Found" using Vista
by dental_art » Fri Sep 25, 2015 4:17 pm
Prodotto
DAVID 3D SCANNER 4.3.5.478
Problema
Ha smesso di funzionare
Data
25/09/2015 14.37
Stato
Segnalazione non inviata
Firma del problema
Nome evento problema: APPCRASH
Nome applicazione: DAVID4.exe
Versione applicazione: 4.3.5.478
Timestamp applicazione: 56026695
Nome modulo con errori: KERNEL32.dll!K32EnumProcesses
Versione modulo con errori: 6.0.6002.19454
Timestamp modulo con errori: 55ae6da5
Codice eccezione: c0000139
Offset eccezione: 0006f40f
Versione SO: 6.0.6002.2.2.0.256.1
ID impostazioni locali: 1040
Informazioni aggiuntive 1: 9d13
Ulteriori informazioni 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Ulteriori informazioni 3: 9d13
Ulteriori informazioni 4: 1abee00edb3fc1158f9ad6f44f0f6be8
DAVID 3D SCANNER 4.3.5.478
Problema
Ha smesso di funzionare
Data
25/09/2015 14.37
Stato
Segnalazione non inviata
Firma del problema
Nome evento problema: APPCRASH
Nome applicazione: DAVID4.exe
Versione applicazione: 4.3.5.478
Timestamp applicazione: 56026695
Nome modulo con errori: KERNEL32.dll!K32EnumProcesses
Versione modulo con errori: 6.0.6002.19454
Timestamp modulo con errori: 55ae6da5
Codice eccezione: c0000139
Offset eccezione: 0006f40f
Versione SO: 6.0.6002.2.2.0.256.1
ID impostazioni locali: 1040
Informazioni aggiuntive 1: 9d13
Ulteriori informazioni 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Ulteriori informazioni 3: 9d13
Ulteriori informazioni 4: 1abee00edb3fc1158f9ad6f44f0f6be8
- dental_art
- Posts: 18
- Joined: Fri Jul 03, 2015 1:16 pm
Re: DAVID_Setup_4.3.5.478 Entry Point Not Found" using Vista
by hal » Sat Dec 26, 2015 7:33 pm
Hello,
I suggest to reinstall the software, .NET Framework included.
Also check the administrator's rights.
Best regards,
Mattia
I suggest to reinstall the software, .NET Framework included.
Also check the administrator's rights.
Best regards,
Mattia
-
hal - Moderator
- Posts: 1527
- Joined: Thu Mar 01, 2007 4:08 pm
- Location: Cavaria con Premezzo (VA), Italy.
Re: DAVID_Setup_4.3.5.478 Entry Point Not Found" using Vista
by Sven » Thu Jan 14, 2016 10:35 am
Hi Dental_art,
Do you still have that problem?
We don't have a Vista system to test. Does anyone else run DAVID on Windows Vista?
(In general, I recommend to upgrade from Vista to Windows 7, 8.1, or 10.)
Sven
Do you still have that problem?
We don't have a Vista system to test. Does anyone else run DAVID on Windows Vista?
(In general, I recommend to upgrade from Vista to Windows 7, 8.1, or 10.)
Sven
-
Sven - DAVID Developer
- Posts: 1541
- Joined: Mon Jan 22, 2007 8:59 am
- Location: Braunschweig, Germany
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest