Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

[ParticularHardware] Constant crashes while aligning 3.9.1

If you found a bug, please post it here and we will try to eleminate it as soon as possible.

[ParticularHardware] Constant crashes while aligning 3.9.1

Postby Datto » Thu Feb 27, 2014 1:16 am

This is new.

I've been trying to align a set of 11 scans, fairly light-duty work compared to some projects, and I'm getting a crash every 5 minutes or so. This is the first time I've tried working with 3.9.1 Previous revs have not done this :evil: :evil:
David-Laserscanner V.3.9.1 64 bit
Acer K-11 Projector
ImageSource DMK 42AUC03 with 12mm Computar lens
Toshiba satellite L655 Windows 7 Home Premium 64 bit
8GB RAM installed
User avatar
Datto
 
Posts: 81
Joined: Wed Mar 30, 2011 5:53 am

Re: Constant crashes while aligning scans 3.9.1

Postby MagWeb » Thu Feb 27, 2014 12:30 pm

Hi Datto,

could you give further details?
When do the crashes happen? Which align tool? Grouped meshes? What's the sum of the loaded filesizes?

Dids you try 3.9.10 Beta?
http://downloads.david-3d.com/software/DAVID_3.10.0.4205_beta1.zip
posted here:
http://forum.david-3d.com/viewtopic.php?f=16&t=5945
(see changelog over there)
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Constant crashes while aligning scans 3.9.1

Postby Datto » Thu Feb 27, 2014 4:10 pm

It seems to happen when I am toggling visibility of meshes. I will collect more info, thanks.
David-Laserscanner V.3.9.1 64 bit
Acer K-11 Projector
ImageSource DMK 42AUC03 with 12mm Computar lens
Toshiba satellite L655 Windows 7 Home Premium 64 bit
8GB RAM installed
User avatar
Datto
 
Posts: 81
Joined: Wed Mar 30, 2011 5:53 am

Re: Constant crashes while aligning scans 3.9.1

Postby MagWeb » Thu Feb 27, 2014 5:29 pm

I can remember some crash reports where toggling visibility was mentioned (didn't find these posts yet).
Here this is no problem at all...

Upps.. meant 3.10 beta above :oops:
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Constant crashes while aligning scans 3.9.1

Postby Datto » Thu Feb 27, 2014 6:35 pm

The .obj files for the scans (11 of them) are between 3.5 ad 7.5 mb each
Have not tried the 3.10 beta.
David-Laserscanner V.3.9.1 64 bit
Acer K-11 Projector
ImageSource DMK 42AUC03 with 12mm Computar lens
Toshiba satellite L655 Windows 7 Home Premium 64 bit
8GB RAM installed
User avatar
Datto
 
Posts: 81
Joined: Wed Mar 30, 2011 5:53 am

Re: Constant crashes while aligning scans 3.9.1

Postby Datto » Thu Feb 27, 2014 9:34 pm

Just tried the beta linked in the previous post. Same problem but triggered this time by attempting to select 2 meshes for pairwise fine alignment. But it makes me think that previously, selecting meshes for a free alignment may have caused the crash at least in some instances.
David-Laserscanner V.3.9.1 64 bit
Acer K-11 Projector
ImageSource DMK 42AUC03 with 12mm Computar lens
Toshiba satellite L655 Windows 7 Home Premium 64 bit
8GB RAM installed
User avatar
Datto
 
Posts: 81
Joined: Wed Mar 30, 2011 5:53 am

Re: Constant crashes while aligning scans 3.9.1

Postby MagWeb » Fri Feb 28, 2014 9:18 am

Do you select the meshes via 3D scene or via the list box?
Do the crashes happen in both ways?

I move this topic to bug reports, for this happens with the latest version also...
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Constant crashes while aligning scans 3.9.1

Postby Datto » Fri Feb 28, 2014 3:04 pm

I select the meshes via list box.

I was able to avoid crashing yesterday by minimizing the number of scans visible during the process, keeping it to three until final global fine alignment. (which proceeded with no problems)
David-Laserscanner V.3.9.1 64 bit
Acer K-11 Projector
ImageSource DMK 42AUC03 with 12mm Computar lens
Toshiba satellite L655 Windows 7 Home Premium 64 bit
8GB RAM installed
User avatar
Datto
 
Posts: 81
Joined: Wed Mar 30, 2011 5:53 am

Re: [ParticularHardware] Constant crashes while aligning 3.9

Postby Sven » Wed Mar 05, 2014 1:14 pm

Sorry, I can't reproduce that problem. I have labeled this thread "[ParticularHardware]".
What graphics card does your computer have?
Sven
User avatar
Sven
DAVID Developer
 
Posts: 1541
Joined: Mon Jan 22, 2007 8:59 am
Location: Braunschweig, Germany

Re: [ParticularHardware] Constant crashes while aligning 3.9

Postby Datto » Thu Mar 06, 2014 11:48 pm

I;m not used to using a Windows machine, and the info I can find onboard the computer doesn't even amount to cursory. Display adaptor: Intel(R) HD Graphics [That's all it says]


An online search revealed this:
Toshiba Satellite L655-S5069

Specifications

Toshiba Satellite L655-S5069Notebook: Toshiba Satellite L655-S5069 (Satellite L650 Series)
Processor: Intel Core i3 350M
Graphics Adapter: Intel Graphics Media Accelerator (GMA) HD Graphics
Display: 15.6 inch, 16:9, 1366x768 pixels, glossy: yes
Weight: 2.5kg


The crashing is new,
David-Laserscanner V.3.9.1 64 bit
Acer K-11 Projector
ImageSource DMK 42AUC03 with 12mm Computar lens
Toshiba satellite L655 Windows 7 Home Premium 64 bit
8GB RAM installed
User avatar
Datto
 
Posts: 81
Joined: Wed Mar 30, 2011 5:53 am


Return to Bug Report

Who is online

Users browsing this forum: No registered users and 2 guests