Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Textures and fusion

You can post your wishes for new features in future program versions here.

Textures and fusion

Postby NARMELLA » Fri Jun 05, 2015 9:52 am

Hi Seven and Simon

This is a problem that it exist with dls ; is to merging textures in fusion.
Here is a simple comparison with David laser scanner and Geomagic design X.

The result is a combination of 4 single scans ( created in dls )

LSCO043.png


NARMELLA
Data projector : NEC VE 281
Camera(s) : Canon eos 600D (3x)
Software : Lets scan 2.5 + David laser scanner 3.9
گشتاور صنعت تبریز
User avatar
NARMELLA
 
Posts: 354
Joined: Thu May 29, 2014 9:18 am

Re: Textures and fusion

Postby NARMELLA » Sat Jun 06, 2015 10:17 am

Hi again dear Sven and Simon ,

I don't know you have enough time to read this topic or not ( like me :wink: )

Here are additional information about this problem :

LSCO041.png
Alignment before fusion

LSCO042.png
After fusion


Regards
NARMELLA
Data projector : NEC VE 281
Camera(s) : Canon eos 600D (3x)
Software : Lets scan 2.5 + David laser scanner 3.9
گشتاور صنعت تبریز
User avatar
NARMELLA
 
Posts: 354
Joined: Thu May 29, 2014 9:18 am

Re: Textures and fusion

Postby NARMELLA » Sat Jun 13, 2015 5:54 pm

Even by using :

David laser scanner
Version: 4.2.0.134
Date: 2015-04-14

LSCO048.png


:( :wink:
NARMELLA
Data projector : NEC VE 281
Camera(s) : Canon eos 600D (3x)
Software : Lets scan 2.5 + David laser scanner 3.9
گشتاور صنعت تبریز
User avatar
NARMELLA
 
Posts: 354
Joined: Thu May 29, 2014 9:18 am

Re: Textures and fusion

Postby hunkatibor2 » Sat Jun 13, 2015 6:35 pm

Hi
Image
All upgrading to try to get a license?
Tibor :oops:
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Textures and fusion

Postby hunkatibor2 » Sat Jun 13, 2015 7:26 pm

Hi
SORY , OK
Image
Tibor :D :D :D
Attachments
2015-06-13_20-24-05.png
2015-06-13_20-27-57.png
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Textures and fusion

Postby NARMELLA » Sat Jun 13, 2015 7:53 pm

Hi Tibor,

Thank you very much for your information. :D

But you will see this problem when it needs to have a closer looks to a large objects not when you want to scan all visible surfaces in a single scan.
And as you see in the first picture , The merging result with Geomagic design x has not any problem.

Thank you
NARMELLA
Data projector : NEC VE 281
Camera(s) : Canon eos 600D (3x)
Software : Lets scan 2.5 + David laser scanner 3.9
گشتاور صنعت تبریز
User avatar
NARMELLA
 
Posts: 354
Joined: Thu May 29, 2014 9:18 am


Return to Feature Wish List

Who is online

Users browsing this forum: No registered users and 1 guest