Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Dual Camera?

You can post your wishes for new features in future program versions here.

Re: Dual Camera?

Postby jibberjive » Thu Apr 04, 2013 11:52 am

I am also very interested in the dual camera progress, if there is any to report.
jibberjive
 
Posts: 18
Joined: Sat Mar 09, 2013 9:27 am

Re: Dual Camera?

Postby imshinji » Tue Jun 04, 2013 11:51 pm

i think the next big thing in DAVID Laserscanner should be calibration and scanning with multiple cameras.
imshinji
 
Posts: 3
Joined: Fri May 31, 2013 11:55 am

Re: Dual Camera?

Postby hunkatibor2 » Fri Jan 10, 2014 9:03 am

HI
http://www.toshiba.com/taec/news/press_releases/2014/assp_14_698.jsp
The market is a solution of the two cameras. David is now the program should be the reception of origin.
Tibor
Attachments
dual-kamera.jpg
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Dual Camera?

Postby hunkatibor2 » Mon Mar 17, 2014 7:35 am

Hi Sven
Image
Build a two-camera hardware and I look forward to the software. :P
Tibor
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Dual Camera?

Postby Leinad78 » Tue May 20, 2014 8:15 am

Would you recommend that projector?
Leinad78
 
Posts: 10
Joined: Sat Nov 30, 2013 11:48 am

Re: Dual Camera?

Postby BoneIndustries » Tue Aug 05, 2014 5:46 pm

Any update on getting 2 cameras with DAVID? I'm hoping that the 2 cameras will limit the number of scans and any fringe data generated. Less scans, hopefully file sizes will be smaller by reducing duplicated points. I keep running into problems with fringe data by the "shadows" the one camera sees. I believe that I am losing detail on figurines that have small details or texture like furry.
BoneIndustries
 
Posts: 43
Joined: Wed Nov 20, 2013 6:18 am

Re: Dual Camera?

Postby TheChosenOne » Fri Oct 03, 2014 12:04 am

Two or more ... :twisted:
User avatar
TheChosenOne
 
Posts: 47
Joined: Sun May 01, 2011 7:47 pm
Location: Ukraine


Re: Dual Camera?

Postby Oteck » Sun Apr 17, 2016 6:21 am

so... when? I'm on an itch to buy a 2 camera setup
Oteck
 
Posts: 17
Joined: Mon Oct 26, 2015 6:32 pm

Re: Dual Camera?

Postby TheChosenOne » Sun Apr 17, 2016 7:24 am

The setup with two cameras relevant for scanning flat parts. When using the turntable, two cameras are not actual.
There is still a problem to calibrate both cameras at the same scale.
User avatar
TheChosenOne
 
Posts: 47
Joined: Sun May 01, 2011 7:47 pm
Location: Ukraine

Re: Dual Camera?

Postby lvrennes » Tue Aug 16, 2016 11:44 am

FInally!!! : :mrgreen: :mrgreen: :mrgreen:
lvrennes
 
Posts: 6
Joined: Mon Dec 19, 2011 9:03 am

Previous

Return to Feature Wish List

Who is online

Users browsing this forum: No registered users and 1 guest

cron