Dear DAVID Community,
As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.
To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums
Questions, problems, comments and tips regarding the 3d scanning process.
I'm trying to scan long narrow object - egde of ice skate blade in high resolution.
Lenght of the blade is 300 mm. Width is about 2-3 mm. I can move blade with constant speed.
Is it possible to perform scan with DAVID software? Laser and camera are fixed while scanning.
- Posts: 1
- Joined: Thu Sep 18, 2014 12:56 pm
If it's moving then no, doing a laser scan it is very slow, even structured light scanning would be an issue.
If it's a shiny object then you need to cover it with something otherwise it will reflect the laser away. There's a special spray almost like gray paint that can be bought to cover shiny or transparent objects. Or things like baby powder.
- Posts: 13
- Joined: Wed Jul 23, 2014 5:15 pm
Return to 3D Laser Scanning
Who is online
Users browsing this forum: No registered users and 2 guests