Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Shoemaking with CNC technology

Questions, problems, comments and tips regarding the 3d scanning process.

Re: Shoemaking with CNC technology

Postby hunkatibor2 » Sat Oct 01, 2011 12:19 pm

Hi
Attachments
Resize of ADVANCED-COMPOSIT -1.PNG
Advanced Composites
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Shoemaking with CNC technology

Postby hunkatibor2 » Sat Oct 01, 2011 1:36 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Shoemaking with CNC technology

Postby nickg4000 » Wed Oct 05, 2011 9:47 am

Hi Tibor

My inserts just hold the heel and instep in shape and so are only about half the length of the shoe. I think that this is the most important bit to get right. The toes etc will look after themselves o a flat surface so long as they have space to move when walking...

Nick
nickg4000
 
Posts: 12
Joined: Tue Mar 08, 2011 12:39 pm

Re: Shoemaking with CNC technology

Postby hunkatibor2 » Mon Oct 10, 2011 12:50 pm

Hi Nick
Attachments
betét.PNG
betét
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Shoemaking with CNC technology

Postby hunkatibor2 » Sat Oct 15, 2011 2:05 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Shoemaking with CNC technology

Postby Untangler » Wed Jan 30, 2013 10:54 pm

Tibor, it seems, you've eaten a dog on shoes, could you advise:
In order to get what is inside a boot, I need to put some material inside a boot and wait until it gets solid/frozen.
Afterwards, I do scan. But whatever the materials I put inside a boot, they deform a boot.
Water can only be frozen, but it doesn't completely fulfill the boot, I tried paraffin, it's no good either.
Plastelina? Germetik? Gypsum?
Untangler
 
Posts: 1
Joined: Tue Sep 25, 2012 5:33 pm

Re: Shoemaking with CNC technology

Postby VDX » Wed Jan 30, 2013 11:34 pm

... you can embed the shoe in 2K-PU-foam and then cut the block in halves and scan the inner surface without distortions ...

Viktor
VDX
 
Posts: 260
Joined: Wed Jul 04, 2012 1:35 pm

Previous

Return to 3D Laser Scanning

Who is online

Users browsing this forum: No registered users and 2 guests

cron