Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Hunka Tibor New Hardver

Questions, problems, comments and tips regarding the 3d scanning process.

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Sat Dec 07, 2013 5:10 pm

Hi
Attachments
cpu and memori.jpg
CPU and MEMORI Test
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Sat Dec 07, 2013 5:31 pm

Hi
The Basler camera software is more of a test image. If you will fill in pretty steadily moving in one direction. I do not know this is normal or not.
It launches the Start button, essentially digitized. :lol:
Tibor
Attachments
test image 4.jpg
test image 4
test image 3.jpg
digitalization
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Sat Dec 07, 2013 6:10 pm

Hi
I can produce a test image, here are the waves.
Tibor :shock:
Attachments
2013-12-07_17-56-52.png
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Hunka Tibor New Hardver

Postby MagWeb » Sun Dec 08, 2013 12:38 am

This seems to be quite right. :D

There are many funny things you can do feeding virtual images.
Would be a very interesting adventure to use DAVID as a 3D encoder with a set of not at all grabbed but modified images . This could be some kind of virtual art.
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Sun Dec 08, 2013 9:51 am

Hi
But this is a mistake! I can not use the Basler camera. Once again I ask why the laser line fluctuates.???
Tibor :?: :?: :?:
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Hunka Tibor New Hardver

Postby MagWeb » Sun Dec 08, 2013 11:24 am

Your cam image is stable under calibration conditions?
And it starts to swing if only the laserline is visible?
I don't know this cam which seems to offer many setting possibilities...

The only thing I can imagine is that some lowlight automatic mode is activated?
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Sun Dec 08, 2013 6:28 pm

Hi
Where to look for this possibility off?? :oops: :oops: :oops:
Tibor
Attachments
basler-seting.jpg
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Hunka Tibor New Hardver

Postby MagWeb » Sun Dec 08, 2013 7:04 pm

Hi Tibor,

hard to give some advice. I downloaded the cam's manual and cann't find something...
Maybe there are some automatics in the AOI (= area of interest) settings which crop the image if there are only black pixels?
Do your optics have a motorized iris or a motorized zoom?
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Sun Dec 08, 2013 8:36 pm

Hi
The fully manual lens. The main mistake is jumping on the image in any case, this error should find out what is causing the jumping.
Tibor :cry:
Attachments
a0i.jpg
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Hunka Tibor New Hardver

Postby MagWeb » Mon Dec 09, 2013 6:15 pm

seems your cam's directshow drivers ship with a package named "pylon"...
Make sure you use the latest release... You have to remove an old version before installing a new one
http://www.baslerweb.com/Support_SW_Downloads-18498.html?type=18&series=0&model=0&language=en

Does Virtual VCR show the same jumping line?
http://www.baslerweb.com/media/documents/AW00071603000%20Vid%20Cap%20w%20pylon%20Direct%20Show%20filter.pdf
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Mon Dec 09, 2013 7:51 pm

HI
Unfortunately I gave up the fight Basler camera. Whatever changed not stopped jumping. I think the camera is faulty.
Tibor :( :( :(
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Hunka Tibor New Hardver

Postby MagWeb » Mon Dec 09, 2013 9:43 pm

Sorry to hear that, but a faulty product is always possible.
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Tue Dec 10, 2013 5:12 pm

Hi
I calmed down a bit, my son is looking at the description he sent fluent English and Christmas.
Tibor
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Hunka Tibor New Hardver

Postby MagWeb » Wed Dec 11, 2013 2:14 am

Plese report if there is any progress :)
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Hunka Tibor New Hardver

Postby hunkatibor2 » Wed Dec 11, 2013 10:32 pm

Hi
I managed to configure the software to filter Basler camera. Now the picture does not bounce. But unfortunately when I start stepping motor Mach3 controller software will start jumping again.
Picture when Mach3 wor.
Tibor
Attachments
pc+mach3.jpg
David + Mach3 szoftvare
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

PreviousNext

Return to 3D Laser Scanning

Who is online

Users browsing this forum: No registered users and 3 guests

cron