Hunka Tibor New Hardver

[hunkatibor2]

Hi

[hunkatibor2]

Hi
The Basler camera software is more of a test image. If you will fill in pretty steadily moving in one direction. I do not know this is normal or not.
It launches the Start button, essentially digitized.
Tibor

[hunkatibor2]

Hi
I can produce a test image, here are the waves.
Tibor

[MagWeb]

This seems to be quite right.

There are many funny things you can do feeding virtual images.
Would be a very interesting adventure to use DAVID as a 3D encoder with a set of not at all grabbed but modified images . This could be some kind of virtual art.

[hunkatibor2]

Hi
But this is a mistake! I can not use the Basler camera. Once again I ask why the laser line fluctuates.???
Tibor

[MagWeb]

Your cam image is stable under calibration conditions?
And it starts to swing if only the laserline is visible?
I don't know this cam which seems to offer many setting possibilities...

The only thing I can imagine is that some lowlight automatic mode is activated?

[hunkatibor2]

Hi
Where to look for this possibility off??
Tibor

[MagWeb]

Hi Tibor,

hard to give some advice. I downloaded the cam's manual and cann't find something...
Maybe there are some automatics in the AOI (= area of interest) settings which crop the image if there are only black pixels?
Do your optics have a motorized iris or a motorized zoom?

[hunkatibor2]

Hi
The fully manual lens. The main mistake is jumping on the image in any case, this error should find out what is causing the jumping.
Tibor

[MagWeb]

seems your cam's directshow drivers ship with a package named "pylon"...
Make sure you use the latest release... You have to remove an old version before installing a new one


Does Virtual VCR show the same jumping line?

[hunkatibor2]

HI
Unfortunately I gave up the fight Basler camera. Whatever changed not stopped jumping. I think the camera is faulty.
Tibor

[MagWeb]

Sorry to hear that, but a faulty product is always possible.

[hunkatibor2]

Hi
I calmed down a bit, my son is looking at the description he sent fluent English and Christmas.
Tibor

[MagWeb]

Plese report if there is any progress

[hunkatibor2]

Hi
I managed to configure the software to filter Basler camera. Now the picture does not bounce. But unfortunately when I start stepping motor Mach3 controller software will start jumping again.
Picture when Mach3 wor.
Tibor