Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Sweeper - Line generating program

Questions, problems, comments and tips regarding the 3d scanning process.

Sweeper - Line generating program

Postby eliscio » Sun Mar 14, 2010 10:26 pm

Hi Everyone,

I wanted to give you an "alpha" version of "Sweeper". This is a line generating program that you can use to project a line across your screen instead of a laser (for use with a projector).

Since I have extra machines I use one to drive the projector and the other to do the scanning...

http://dl.dropbox.com/u/4053278/sweeper ... _amd64.exe

Controls:
* escape: quit
* f: toggle fullscreen
* space: toggle play/pause
* backspace: set line to init

[line size]
* down arrow: make line thinner
* up arrow: make line thicker

[speed control]
* right arrow: speed up
* down arrow: speed low

[direction]
* h: horizontal line (vertical movement)
* v: vertical line (horizontal movement)

[sense]
* i: invert (top-bottom -> bottom-top; left-right -> right:left)

[repeat]
* r: repeat (when reaches end, goes to the begining)
* l: special loop (reaches end, inverts direction)

[colour]
* b: black line, white background
* w: white line, black background

Special thanks to Tatiana Al-Chuyer Pereira Martins for doing this!

Please feel free to post any bugs on this thread.

Happy Scanning!

Eugene
www.ai2-3d.com
User avatar
eliscio
 
Posts: 230
Joined: Sat Mar 14, 2009 2:05 am

Postby hal » Sat Mar 27, 2010 7:20 pm

Thanks! :D
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: Sweeper - Line generating program

Postby joecnc2006 » Mon Apr 12, 2010 9:33 am

this program when i press the f it makes my programs expand two monitors (the second being the projector, and the scanning line goes to the 1st monitor not the second for the projector.
Joe

David-Laserscanner Professional Edition, Logitech Pro 9000 Webcam, LC532-5-3-F(16x65)

www.joescnc.com
User avatar
joecnc2006
 
Posts: 207
Joined: Fri Dec 12, 2008 3:10 pm

Re: Sweeper - Line generating program

Postby eliscio » Sat Apr 24, 2010 1:35 am

Hi Joe,

Sorry for the long absence, but have been really busy lately. I have noticed this as well so I am going to see if we can choose which monitor the projector goes onto...would that help?
www.ai2-3d.com
User avatar
eliscio
 
Posts: 230
Joined: Sat Mar 14, 2009 2:05 am

Re: Sweeper - Line generating program

Postby Jonathan_SA » Tue Oct 13, 2015 11:04 am

eliscio wrote:Hi Joe,

Sorry for the long absence, but have been really busy lately. I have noticed this as well so I am going to see if we can choose which monitor the projector goes onto...would that help?


Hi there,

I think "sweeper" is a good idea, I was wondering if you have any further updates on your software? Any scan results to show? etc.

Cheers
Jon
Jonathan_SA
 
Posts: 3
Joined: Wed Jul 15, 2009 3:39 am
Location: Auckland, New Zealand

Re: Sweeper - Line generating program

Postby eliscio » Fri Dec 04, 2015 10:34 pm

Sorry for the late reply...sadly the programmer who worked on this a while back has moved on and nothing ever came of this. It's too bad because I thought it was a great idea. Even so, I have moved on to structured light scanning now.

Maybe there is another person that is willing to take this on??
www.ai2-3d.com
User avatar
eliscio
 
Posts: 230
Joined: Sat Mar 14, 2009 2:05 am


Return to 3D Laser Scanning

Who is online

Users browsing this forum: No registered users and 3 guests

cron