Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Message Board: 3rd-Party 3D Printers

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Sat May 03, 2014 3:32 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Tue May 06, 2014 4:49 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Mon May 12, 2014 2:22 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Thu May 15, 2014 6:37 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Thu May 22, 2014 4:47 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Wed May 28, 2014 11:27 am

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby WalterMo » Mon Jun 02, 2014 3:56 pm

I just found a new DLP 3D-printer on Kickstarter, the Kudo3D Titan 1:
https://www.kickstarter.com/projects/ku ... la-3d-prin

It can print bigger objects and is cheaper and faster than similar printers, like the B9C and the Form 1.

If their specs are true it could really be a worthwhile bargain.

Edit: This is the link to their print results, they are really great, much better than those of my WIZARD1!
https://www.kickstarter.com/projects/ku ... prin/posts
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: Message Board: 3rd-Party 3D Printers

Postby WalterMo » Thu Jun 26, 2014 11:37 am

And again a new low-cost DLP printer. This comes from China:

http://www.uncia3d.com/uncia.html
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: Message Board: 3rd-Party 3D Printers

Postby MagWeb » Sat Jun 28, 2014 10:57 am

Sculptify Announces ‘David’, Their New 3D Printer,

some misleading branding?

Although this printer seems to be pretty interesting, for it prints from plastic pellets directly (no filament needed).

http://3dprint.com/7322/sculptify-david-3d-printer/
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Message Board: 3rd-Party 3D Printers

Postby Simon » Tue Jul 01, 2014 3:03 pm

MagWeb wrote:Sculptify Announces ‘David’, Their New 3D Printer,
some misleading branding?

Thanks you Gunter for the link. I wonder why they haven chosen the name "David" for their 3D printer. Unfortunately we can not forbid them to use it.
User avatar
Simon
DAVID Developer
 
Posts: 423
Joined: Sun Jan 21, 2007 3:40 pm
Location: Braunschweig - Germany

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Fri Jul 25, 2014 7:23 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Mon Jul 28, 2014 5:48 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Wed Dec 03, 2014 2:06 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Fri Jan 23, 2015 8:58 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

Re: Message Board: 3rd-Party 3D Printers

Postby hunkatibor2 » Fri Mar 20, 2015 7:41 pm

Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary

PreviousNext

Return to 3D Printing

Who is online

Users browsing this forum: No registered users and 1 guest

cron