Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

DIY 3D Printer -- Low Cost & High Resolution

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby WalterMo » Fri May 30, 2014 2:18 pm

Thanks for your words guys!

Francois, 6 & ½ hours wasn't sufficient. The printer needs 25 sec per layer. There are also times in each cycle necessary for shifting the vat with the resin horizontally and also the vertical sled with the print object must be moved, first up and then again down. Also there are some seconds for waiting: The resin was „wiped away“ from the vat's bottom by a wiper and will only slowly reflow.

Jantje, what about your self-designed lawnmower robot?

Regarding the visibility of the single layers: If the part which is printed is rather horizontally you can much better see the single layers. I have attached a close up photo of her right hand and my thumb for size comparison.

Walter
Attachments
Rechte Hand im Detail.jpg
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby jantje » Fri May 30, 2014 2:26 pm

If I compare to the size of your thumb this is a serious zoom in.
I wish my robot worked as good as your 3D printer. Software and electronics work fine but motors seems to die on me.
I posted a update yesterday http://blog.baeyens.it/#home
Jantje
User avatar
jantje
 
Posts: 107
Joined: Tue Mar 03, 2009 12:08 am
Location: Belgium

Postby hal » Sat May 31, 2014 9:40 am

That's a really perferct scan.
Compliments :shock:
Mattia

EDIT: I mean PRINT, sorry heheheh
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby WalterMo » Tue Jun 10, 2014 3:02 pm

hal wrote:That's a really perferct scan.
Compliments :shock:
Mattia


Yes Mattia, it's really a perfect scan. :wink:
_________________________________________________________________________________________________________

I found this gypsy girl printed by the DLP printer Kudo3D Titan 1:
https://www.thingiverse.com/make:75662

So why not to print it also and to have a comparison?

My figurine is 140 mm tall and consists of 1336 layers. Print time was about 10 hours.


Walter

PS. The print file, it's a scan of a > 60 years old bust, came from here:
https://www.thingiverse.com/thing:220052
Attachments
Von_halb_links reduziert.jpg
Gesicht_nah reduziert.jpg
A close up photo of her face. The single layers aren't visible with the naked eye.
Gypsy Girl with supports.jpg
The necessary supports were built in Shape Fusion
Ausschnitt von P004redu.jpg
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby hal » Tue Jun 10, 2014 4:32 pm

Sorry Walter, my wrong typing. Sure the scan is great, but I was meaning the PRINT. hehehe
and also the last one... impressive!

Compliments to you and to the Wizard.

Mattia
PC: DELL Alienware 17, Intel I7-4710MQ, 32 Gb Ram, AMD Radeon R9 M290X 4GB.
SO: Win 8.1 64Bit.
CAMs: USB 3.0 CMOS B/N (1280x960, 60 fps).
LENS: 12 mm.
PROJECTOR: DAVID SLS1 ACER K11.
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby WalterMo » Tue Aug 12, 2014 4:07 pm

Thanks Mattia.

After some improvements on my printer, e.g. assembling a stronger x-motor, I started a new print „project“, it's the female stenotypist.
The sexy girl was „built“ in DAVID's Shape Fusion of three parts, all coming from GrabCad. 'Built' means two original parts were exchanged, her head and the office stool. The main part, her body comes from here:
http://grabcad.com/library/woman-writng-1

Her new head with better looking hair, from here:
http://grabcad.com/library/man-and-woman

And finally the fashionable office taboret from here:
http://grabcad.com/library/chair-ball

The hollow print is 162 mm tall and consists of 1545 layers.

Walter
Attachments
Stenotypistin2_2.jpg
The 3D file
Stenotypistin2Redu.jpg
The print
Stenotypistin5xRedu2.jpg
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby hal » Tue Aug 12, 2014 10:53 pm

wonderful
:D :shock: :D
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby DBS » Wed Aug 13, 2014 4:22 am

:shock: :shock: :shock:
wow.... Perfect !
Dell Precision 380; Intel P4@3,0Ghz, WinXP
Camera : Logitech C910
Laser : DealExtreme 5mv Focusable Red
Cheap Motor Driver; 1,8° Stepper motor; 400:1 gearbox (selfmade)
DBS
 
Posts: 28
Joined: Wed Jan 06, 2010 3:05 pm

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby WalterMo » Tue Aug 19, 2014 6:57 am

Thanks Mattia and DBS.

If someone likes to download the file, maybe for printing, here it is:
http://www.thingiverse.com/thing:429146

Walter

PS. Maybe I can persuade again Johanna to colorize this print. :wink:
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby WalterMo » Sun May 03, 2015 1:22 pm

In the meantime Johanna has colorized the print of the female stenotypist.

A big thanks to her!
Attachments
AusschnittBild19b.jpg
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby WalterMo » Wed Dec 16, 2015 5:26 pm

Something to guess:
Do you know whom I have printed?

778 layers à 105µm.
Attachments
Ausschnitt_Bild478.jpg
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby Jokeri » Wed Dec 16, 2015 5:48 pm

The big E
Jokeri
 
Posts: 36
Joined: Sun Mar 27, 2011 3:24 pm

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby fred_dot_u » Wed Dec 16, 2015 7:13 pm

Elvis?
fred_dot_u
 
Posts: 70
Joined: Thu Feb 06, 2014 1:19 am

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby scobo » Wed Dec 16, 2015 9:24 pm

Enrique Iglesias ? :lol:
Acer K10 projector - Logitech C615 webcam (unmodded)
64 bit Windows 10 - 64 bit David 4
scobo
 
Posts: 19
Joined: Tue Oct 20, 2015 7:29 am

Re: DIY 3D Printer -- Low Cost & High Resolution

Postby VDX » Thu Dec 17, 2015 12:45 am

... should be this bust - http://www.thingiverse.com/thing:966908/#files

Viktor
VDX
 
Posts: 260
Joined: Wed Jul 04, 2012 1:35 pm

PreviousNext

Return to 3D Printing

Who is online

Users browsing this forum: No registered users and 1 guest

cron