DAVID-Laserscanner Forum

Incredibly Low-Cost 3D Scanner for Everyone...

Skip to content

Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

DAVID 3.9.0 beta2: One-Click Scan+Align

Discussions about latest DAVID developments, beta versions...
Post a reply

Re: DAVID 3.9.0 beta2: One-Click Scan+Align

Postby hunkatibor2 » Fri Oct 04, 2013 7:22 pm

Hi Sven
Fix the ripple mystery. The camera, laser aperture angle was very low. Increasing the value of the wave ceased immediately, just smooth. We have only lost a step, looking for the cause.
I'll send you pictures of the hardware of the letter, which was preceded by the letter I wrote.
Tibor
Attachments
2013-10-03_20-25-53.png
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: DAVID 3.9.0 beta2: One-Click Scan+Align

Postby hunkatibor2 » Thu Oct 10, 2013 8:31 am

Hi Sven
Ashes on my head whipped myself and went away into the desert to atone for 40 days. S software is impeccable. Align accurately. Panelelt the calibration again manufactured a professional technique. I immediately became a good job.
Tibor :oops: :oops: :oops:
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: DAVID 3.9.0 beta2: One-Click Scan+Align

Postby hunkatibor2 » Thu Oct 10, 2013 8:43 am

Hi
Attachments
2013-10-09_19-45-51.png
2013-10-09_19-10-14.png
2013-10-09_19-48-52.png
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top

Re: DAVID 3.9.0 beta2: One-Click Scan+Align

Postby Sven » Thu Oct 10, 2013 11:53 am

Hi Tibor,
Thanks for the info! Good to know that the problem is solved :D
Sven
User avatar
Sven
DAVID Developer
 
Posts: 1541
Joined: Mon Jan 22, 2007 8:59 am
Location: Braunschweig, Germany
Top

Re: DAVID 3.9.0 beta2: One-Click Scan+Align

Postby hunkatibor2 » Tue Oct 15, 2013 12:46 pm

Hi
34 x 2-axis inspection which is one of the stepping motor on the other hand is moving.
Tibor
Attachments
kerámia1.jpg
kerámia5.jpg
internal surface
kerámia2.jpg
Intel Xeon E5410 2.33GHZ 16GB RAM Windows 7 64bit David 4.5.0
2 Basler A622F camera 2 Tamron Asfirical AF 28-80mm lense
LG DLP Projector PF1500G Canon D40 Tokina 17-70mm 1:2.8-4,5
Humanti Calibration panel system and Alignmed&Two camera
hunkatibor2
 
Posts: 1408
Joined: Tue Mar 16, 2010 4:26 pm
Location: Hungary
Top
Previous
Post a reply

Return to DAVID Development

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
cron