Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Hardware Signatures

Discussions about latest DAVID developments, beta versions...

Re: Hardware Signatures

Postby Kondor1 » Thu May 17, 2012 2:13 pm

OS: Win7 x64 Home Premium
CPU: Intel Core i7-2670QM 2.2Ghz
GPU: Intel HD3000
Ram: 16GB
Cam: Logitech Pro 9000
Projector: NEC MT1040 (10-12 year old 800x600) I recommend a newer model, lol.

Lego Mindstorms for rotating turntable/laserline.
Projector mounted to traytable, then tripod.
Kondor1
 
Posts: 35
Joined: Mon Mar 14, 2011 2:51 pm

Re: Hardware Signatures

Postby fred_dot_u » Tue Apr 15, 2014 3:58 pm

OS: Windows 7 x64 Home Premium
CPU: 4th Generation Intel Core i7-4900MQ Processor (Overlocked, 8MB Cache, up to 4.0GHz w/ Turbo Boost)
GPU: NVIDIA GeForce GTX 765M with 2GB GDDR5
RAM: 16GB Dual Channel DDR3L at 1600MHz
Cam: Logitech Pro9000
Lens: ECL-615MIV 6-15mm manual iris, manual focus - http://www.securityproductdepot.com/ with cs mount from ebay -
http://www.ebay.ca/itm/2-PCS-CCTV-camera-board-lens-CS-Lens-Mount-mtl-/221378333828?ssPageName=ADME:L:OC:US:3160
Projector: Acer K132

Side note, the lens and mount and camera assembly make for a perfect combination with the Acer K132. I had a local machinist who is also a friend construct for me a tripod mount that attaches to the lens barrel. The Logitech Pro 9000 circuit board is bare-naked and unsupported other than by the CS mount and is quite stable. When/if I get my 3d printer, I'll construct an enclosure.
Image

If someone else uses this lens or one with similar dimensions, 1.26 " ID, and desires to have a tripod mount of this design, I have two "spares" I'm willing to part with. If there is a high enough demand (unlikely), the machinist can create a small production run.
fred_dot_u
 
Posts: 70
Joined: Thu Feb 06, 2014 1:19 am

Re: Hardware Signatures

Postby fred_dot_u » Tue Apr 15, 2014 10:39 pm

Missed edit on the camera setup. There's a "sample" IR filter installed over the sensor and under the lens. Mine is a Sunex IRC30-10R_SU from http://www.sunex.com One filter was attached by a tiny bit of CA adhesive (super glue) wicked in under the edge. The other was attached with a dab of ordinary hot glue. I had originally thought that the super glue had wicked onto the sensor, but it was later determined that the iris was defective and not properly adjusting the amount of light getting to the sensor. With a replaced lens, both are working fine, although I would not chance the super glue a second time.
fred_dot_u
 
Posts: 70
Joined: Thu Feb 06, 2014 1:19 am

Previous

Return to DAVID Development

Who is online

Users browsing this forum: No registered users and 1 guest

cron