Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

calibration panels

Discussions about latest DAVID developments, beta versions...

calibration panels

Postby dental_art » Fri Apr 29, 2016 8:59 am

mr David :) because you do not produce panels of individual calibration from 60 mm or 30 mm would find them very comfortable for customized solutions

thank you
dental_art
 
Posts: 18
Joined: Fri Jul 03, 2015 1:16 pm

Re: calibration panels

Postby conceptdsn » Sun Oct 16, 2016 5:44 pm

I have lasered out several panels from 300mm down to 30mm. i will shoot some pictures as soon as i build the structures for these panels.
If i was to sell the 300 mm panels they would be around 170-200 for the set. the material is from a white cast acrylic.
I currently made a base and wall frame that is exactly 90 degrees. using precision angle and lazer.
I confirmed it with a scan to make sure everything was accurate then i scanned an object with known dimensions and checked the accuracy afterward. i am impressed with how well the project worked.
Camera's: Canon eos t3i, 2x c615 webcams
150 mm calibration panel commonly used
acer k135 Projector/ infocus trial projector
Process computer: i7- 8 core processor, 128g ram, nvidia 6000

www.conceptdsn.com
conceptdsn
 
Posts: 9
Joined: Fri Aug 12, 2016 2:10 am

Re: calibration panels

Postby Oteck » Tue Oct 25, 2016 4:17 am

i had a sign shop made me one with composite aluminum backing (1/4" thick) to make it for around the $300 canadian. This is on a 40cm scale on a 31" square so you may have to sweet talk the sign shop to get you a nice deal, also since it's b/w it's wouldn't cost as much.... Mine has a flat finish so it doesn't reflect too much light but i kind of wish i used a shade grey for the dots.
Oteck
 
Posts: 17
Joined: Mon Oct 26, 2015 6:32 pm


Return to DAVID Development

Who is online

Users browsing this forum: No registered users and 2 guests

cron