Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Odd Numb er Scans Not Aligning in Manual Sequence.

Problems, solutions and discussion about scanning with a video projector and stripe patterns.

Odd Numb er Scans Not Aligning in Manual Sequence.

Postby micr0 » Sat Oct 08, 2016 9:07 pm

I now have 2 cameras and have been scanning them in extended view mode. At the end of 12 increments I have 24 scans in the shape fusion list. When I end the sequence David only aligned the even numbered scans to each other. #4 to#2, #6 to #4 etc. The odd numbered scans are left unaligned.

Is there a setting i missed somewhere?
µ
micr0
 
Posts: 315
Joined: Wed Mar 19, 2014 3:54 pm
Location: NYC

Re: Odd Numb er Scans Not Aligning in Manual Sequence.

Postby ThomasSc » Sun Oct 09, 2016 9:14 am

Yes, where is the switch for auto align the scans with dual cam?
What is the benefit in David5 with dual cam?
Where is the com interface?

Best regards
Thomas
ThomasSc
 
Posts: 11
Joined: Thu Nov 27, 2014 11:43 am
Location: Arnschwang, Bavaria

Re: Odd Numb er Scans Not Aligning in Manual Sequence.

Postby Mongrel » Sun Oct 09, 2016 11:33 am

I've had no problems with 2 cameras, but I've got extended view mode un-checked and all scans auto align.

Mongrel.
Mongrel
 
Posts: 1
Joined: Mon Mar 30, 2015 10:45 pm

Re: Odd Numb er Scans Not Aligning in Manual Sequence.

Postby drndadoo » Mon Oct 10, 2016 9:12 am

COM port is disabled.
drndadoo
DAVID Support
 
Posts: 194
Joined: Tue Mar 24, 2015 3:09 pm

Re: Odd Numb er Scans Not Aligning in Manual Sequence.

Postby ThomasSc » Mon Oct 10, 2016 5:28 pm

It's realy bad to disable the COM interface.
A manual for David5 would be great.
Is it right, if extended view is un-checked, the scan works only on one camera?
How works the alignment in extended view?
ThomasSc
 
Posts: 11
Joined: Thu Nov 27, 2014 11:43 am
Location: Arnschwang, Bavaria


Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 4 guests