Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

TT-1 attachments/holes on top

Problems, solutions and discussion about scanning with a video projector and stripe patterns.

TT-1 attachments/holes on top

Postby fossilexpress » Wed Jul 06, 2016 5:43 pm

Have been successfully using the TT-1 scanner. First, I cannot find a manual online at the site given in the Quick Start Guide. I was also wondering about the various holes/indentations on top. I assume these are for attachments for holding objects in place. Is that correct? Are there sexisitng attachments or do I need to make my own? Thanks! - Roy
fossilexpress
 
Posts: 5
Joined: Tue Jun 28, 2016 3:45 pm

Re: TT-1 attachments/holes on top

Postby fossilexpress » Wed Jul 06, 2016 6:16 pm

Damn - I need to spellcheck! That should be "existing" - Roy
fossilexpress
 
Posts: 5
Joined: Tue Jun 28, 2016 3:45 pm

Re: TT-1 attachments/holes on top

Postby GabeG75 » Wed Jul 06, 2016 8:31 pm

I also just bought a tt-1 a couple weeks back. Your right theres no manual that I know of. Once I got it all plugged in its pretty straight forward. all of the options are within the david 4 software. number of scans and how many degrees of rotation.

As for the holes, There should be pegs that came with the turntable. no clue what they are for though, sorry.
GabeG75
 
Posts: 8
Joined: Sat Jun 25, 2016 10:33 pm

Re: TT-1 attachments/holes on top

Postby fossilexpress » Thu Jul 07, 2016 5:09 pm

Will go back to the box and look for the pegs. Must have missed them. Thanks - Roy
fossilexpress
 
Posts: 5
Joined: Tue Jun 28, 2016 3:45 pm

Re: TT-1 attachments/holes on top

Postby fossilexpress » Thu Jul 07, 2016 6:20 pm

Nope. No pegs in box. Checked twice. - Roy
fossilexpress
 
Posts: 5
Joined: Tue Jun 28, 2016 3:45 pm


Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 1 guest