Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Incorrect alignment when fusing scans

Problems, solutions and discussion about scanning with a video projector and stripe patterns.

Re: Incorrect alignment when fusing scans

Postby vvs » Mon Mar 28, 2016 9:17 pm

Hi Tibor

Thanks so much for opening the scans and giving me your help. I removed the scans that had the bad alignment and re-fused. The texture on the face was better, but the texture on the rest of the model still does not look good.

Here is the model from the side, with all the scans aligned:
Image

Here is the fusion result:
Image

Unfortunately when I view the fusion result with texture, I still get lots of artifacts.
Image

The image taken during the scan, via grab texture looks much cleaner with no banding.
Image

Thanks for your help
vvs
 
Posts: 16
Joined: Sat Dec 19, 2015 3:42 am

Previous

Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 1 guest

cron