Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

Camera over projector (rig built with using SLS-2 bundle)

Problems, solutions and discussion about scanning with a video projector and stripe patterns.

Camera over projector (rig built with using SLS-2 bundle)

Postby bartosh44 » Thu Sep 24, 2015 9:41 pm

Could somebody show picture of builded rig with camera set up over projector (used parts from SLS-2: camera and projector)
bartosh44
 
Posts: 24
Joined: Tue Nov 18, 2014 1:03 pm
Location: Lublin / Polska

Re: Camera over projector (rig built with using SLS-2 bundle

Postby bartosh44 » Fri Sep 25, 2015 8:54 pm

I`m curious which axes camera and projector should be aligned. Should lamp and matrix be aligned (matched) in more than one axis (middle of projector lamp and middle of camera matrix)?
bartosh44
 
Posts: 24
Joined: Tue Nov 18, 2014 1:03 pm
Location: Lublin / Polska


Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 1 guest