Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by the end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

canon 450D image graber

Problems, solutions and discussion about scanning with a video projector and stripe patterns.

canon 450D image graber

Postby qulet » Sun Aug 30, 2015 8:51 pm

I have a Canon 450D camera can anybody describe (step by step) procdurę calibration and scanning SL with the "Image Graber" My camera is not possible to record video files. I looked online searching for information on this subject. Descriptions related video sequences ...
qulet
 
Posts: 45
Joined: Sat Dec 03, 2011 5:46 pm
Location: Poland

Re: canon 450D image graber

Postby Curiousjeff » Sun Aug 30, 2015 9:13 pm

The Canon 450D has live view. I have that camera. You do not need to use Image grabber.

You can use it with David 32bit v3.10.

To use image grabber:

http://forum.david-3d.com/viewtopic.php?f=15&t=5708&p=27290#p27290

I recommend you download Letscan. It makes using image grabber much easier !

And read the complet post here:

http://forum.david-3d.com/viewtopic.php?f=8&t=6294&hilit=Letscan

It's important to use the SAME settings for calibration and for scanning (number of patterns, etc...)

The only thing you can change is you can scan using only vertical or horizontal configuration, even though you calibrated with both. The rest should be the same.

Jeff
Panasonic GH4 4K with lens 12-35, Inogeni 4K to USB3 hdmi capture device, projectors: Acer K135/Acer K11/NEC V260X, Canon 60D, macro 60 mm, MagicLantern
Curiousjeff
 
Posts: 230
Joined: Fri Feb 27, 2015 2:17 pm
Location: Geneva, Swizerland


Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 1 guest