Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Help about Canon EOS Kiss X6i

Problems, solutions and discussion about scanning with a video projector and stripe patterns.

Help about Canon EOS Kiss X6i

Postby poivre » Mon Jul 14, 2014 10:46 am

please help me connect Canon EOS Kiss X6i. I use David 3.10.3 pro (32 & 64). Thank you very much.
poivre
 
Posts: 2
Joined: Thu Jul 10, 2014 3:00 am

Re: Help about Canon EOS Kiss X6i

Postby NARMELLA » Mon Jul 14, 2014 11:18 am

Hi

The last release of david laser scanner software uses canon ed-sdk 2.14 .
and it supports your camera Canon EOS REBEL T4i Digital SLR camera (EOS 650D/EOS Kiss X6i);

To use :
- Connect your camera to computer via usb cable . then turn it on.
- Close all other applications which they are using canon cameras like canon eos utility.
- Start david 32 bit and select your camera to use.

Be successful

NARMELLA
Data projector : NEC VE 281
Camera(s) : Canon eos 600D (3x)
Software : Lets scan 2.5 + David laser scanner 3.9
گشتاور صنعت تبریز
User avatar
NARMELLA
 
Posts: 354
Joined: Thu May 29, 2014 9:18 am

Re: Help about Canon EOS Kiss X6i

Postby poivre » Tue Jul 15, 2014 7:52 am

NARMELLA wrote:Hi

The last release of david laser scanner software uses canon ed-sdk 2.14 .
and it supports your camera Canon EOS REBEL T4i Digital SLR camera (EOS 650D/EOS Kiss X6i);

To use :
- Connect your camera to computer via usb cable . then turn it on.
- Close all other applications which they are using canon cameras like canon eos utility.
- Start david 32 bit and select your camera to use.

Be successful

NARMELLA


Hi

I'm try but in "video source" has not show my device. Plz help. Thanks

Image
poivre
 
Posts: 2
Joined: Thu Jul 10, 2014 3:00 am

Re: Help about Canon EOS Kiss X6i

Postby MagWeb » Tue Jul 15, 2014 11:05 am

Try SetupType "Stuctured Light" instead of DAVID SLS-2. Seems SLS-2 presets expect the DAVID-cam.
MagWeb
Moderator
 
Posts: 2499
Joined: Wed Jul 18, 2007 8:48 pm

Re: Help about Canon EOS Kiss X6i

Postby NARMELLA » Tue Jul 15, 2014 11:13 am

In addition

Make sure you're running DAVID3.exe and not DAVID3_x64.exe

NARMELLA
Data projector : NEC VE 281
Camera(s) : Canon eos 600D (3x)
Software : Lets scan 2.5 + David laser scanner 3.9
گشتاور صنعت تبریز
User avatar
NARMELLA
 
Posts: 354
Joined: Thu May 29, 2014 9:18 am


Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 1 guest