Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Little objects

Problems, solutions and discussion about scanning with a video projector and stripe patterns.

Re: Little objects

Postby stecma » Mon Sep 09, 2013 7:39 am

Hi Bobby, thank you very much! sometimes something works, now we hope that thousands come to do (lol). Have a nice day
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby Lunat1c » Tue Oct 01, 2013 1:36 pm

stecma wrote:Dear friends, thanks to the visibility that this forum and certainly too generous to the publication of my results on the recent newsletter a Japanese company has contacted me to ask me to perform a test on a generic sample. They use a well-known laser scanner and were very impressed with the results: here they are!


It should be a pleasure and fun to scan this chick!
Mitsubishi xd 206u, logitech pro9000, acer 3820tg
User avatar
Lunat1c
 
Posts: 175
Joined: Sat Jul 27, 2013 10:37 am
Location: City: Antalya, Country: Turkey

Re: Little objects

Postby WalterMo » Wed Oct 02, 2013 7:58 am

Lunat1c wrote:
It should be a pleasure and fun to scan this chick!



Also it would be a pleasure and challenge to 3D print this chick!
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany

Re: Little objects

Postby stecma » Wed Oct 02, 2013 8:31 am

haha okay, come on, you do know the original Martina
Attachments
Foto.jpg
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby Lunat1c » Thu Oct 03, 2013 1:50 pm

:)

I was talkin' bout this chick!

Martina, sure, is a nice girl, but too young for me to make such a comment.
Attachments
12.jpg
Mitsubishi xd 206u, logitech pro9000, acer 3820tg
User avatar
Lunat1c
 
Posts: 175
Joined: Sat Jul 27, 2013 10:37 am
Location: City: Antalya, Country: Turkey

Re: Little objects

Postby stecma » Thu Oct 03, 2013 3:12 pm

No problem lunatic, Martina has not offended, after all I did not want to put this photo
Best regards
Attachments
IMG_2383.jpg
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby stecma » Fri Oct 04, 2013 6:21 pm

Mikoto Misaka's gun scanned without coating. I could not scan the entire tip of the rod (hard) for lack of time.
Attachments
Gun1.jpg
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby stecma » Fri Oct 04, 2013 6:23 pm

Gun
Attachments
Gun2.jpg
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby Lunat1c » Fri Oct 04, 2013 7:49 pm

it is just great! Awesome!
How did you scan that black gun? Did you rev up the brightness?
And your scans are getting better day by day
Mitsubishi xd 206u, logitech pro9000, acer 3820tg
User avatar
Lunat1c
 
Posts: 175
Joined: Sat Jul 27, 2013 10:37 am
Location: City: Antalya, Country: Turkey

Postby hal » Sat Oct 05, 2013 10:07 am

Hello stecma,

very nice results on the japanese toys. Compliments.
Keep up your job.

Mattia
PC: DELL Alienware 17, Intel I7-4710MQ, 32 Gb Ram, AMD Radeon R9 M290X 4GB.
SO: Win 8.1 64Bit.
CAMs: USB 3.0 CMOS B/N (1280x960, 60 fps).
LENS: 12 mm.
PROJECTOR: DAVID SLS1 ACER K11.
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: Little objects

Postby stecma » Sat Oct 05, 2013 10:32 am

Hello Lunatic1, thank you very much for your appreciation! The plastic is black but opaque enough. The important thing is that before any controls that scans the pattern of light projected onto the object are sharp, especially the thin black lines cross, then I tell you, it is vital that the camera is raised (again as I described earlier) . Good weekend, ciao! Paolo
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby stecma » Sat Oct 05, 2013 10:34 am

Ciao Hal, thank you very much for your appreciation! To get good scans, as in all the work, we must continue to train. Best regards, ciao! Paolo
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby stecma » Sat Oct 05, 2013 12:56 pm

Gun detail
Attachments
Dettaglio.png.png
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby stecma » Sun Oct 06, 2013 8:57 pm

Porsche GT2 model, 50 mm., white coated, five scans
Attachments
Porsche.png
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

Re: Little objects

Postby stecma » Mon Oct 21, 2013 7:43 am

FANTASTIC! Our friend and moderator WalterMo surprises us again: air shipped from Japan by post, scanned in Italy and shipped to Germany via Google Drive here is the 1:1 scale copy of Mikoto Misaka made ​​with the revolutionary DLP printer self-built by Walter: What can I say ... nothing gives me more satisfaction than seeing circle of my scan: thanks Walter!
Attachments
mikoto.jpg
Mikoto Misaka DLP printed
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)

PreviousNext

Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 2 guests

cron