DAVID-Laserscanner Forum

Incredibly Low-Cost 3D Scanner for Everyone...

Skip to content

Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

Little objects

Problems, solutions and discussion about scanning with a video projector and stripe patterns.
Post a reply

Little objects

Postby stecma » Sun Apr 21, 2013 6:27 pm

Scanned without turntable
Attachments
4.jpg
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)
Top

Re: Little objects

Postby stecma » Mon Apr 22, 2013 8:41 pm

Scanned without turntable
Attachments
Personaggio.jpg
Cartoon
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)
Top

Re: Little objects

Postby stecma » Mon Apr 22, 2013 8:48 pm

A fisch in coloured wood mm. 140x90x60, scanned without turntable.
Attachments
Pesce rosso.jpg
Pesce tropicale
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)
Top

Re: Little objects

Postby stecma » Mon Apr 22, 2013 9:21 pm

150 mm high scanned in 30 minuts
Attachments
Madonna.jpg
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)
Top

Re: Little objects

Postby WalterMo » Tue Apr 23, 2013 6:45 am

Very good scans of the small objects.
Can you please give us some more informations what hardware you had used. E.g. what camera, projector (with additional lens?), calibration corner.

Regarding „Mother with baby“: How many single scans were necessary?

Thanks.
User avatar
WalterMo
Moderator
 
Posts: 2363
Joined: Mon Apr 02, 2007 6:52 pm
Location: Braunschweig, Germany
Top

Re: Little objects

Postby stecma » Tue Apr 23, 2013 8:45 am

Hello, thank you for the appreciation. The Madonna and Child Original is 15 cm high. and was recorded with 13 scans your original kit David SLS-1 (Acer K11 + Cam3 without any additional lens). On your manual the pattern of use is wrong, to obtain precise scans of the camera must be lifted from the bar in order to exploit the combination of two angles. There is no use putting it above, below or to the side. The dragon I scanned in 30 minutes. Best regards
Attachments
Draghetto4.jpg
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)
Top

Re: Little objects

Postby stecma » Tue Apr 23, 2013 9:33 am

Scanned with original SLS_1 kit and turntable in 20 minutes
Attachments
Drago_1 (Custom).jpg
Cartoon dragon
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)
Top

Re: Little objects

Postby manish » Tue Apr 23, 2013 2:41 pm

Dear Stecma,

Your scans are really great.
can you explain, what exactly you want to say @ position of camera and projector.
(On your manual the pattern of use is wrong, to obtain precise scans of the camera must be lifted from the bar in order to exploit the combination of two angles.)
It would be really helpful.

Regards
Manish
manish
 
Posts: 120
Joined: Sat Oct 30, 2010 6:18 pm
Location: mumbai
Top

Re: Little objects

Postby Khalid Khattak » Tue Apr 23, 2013 3:35 pm

perfect scan. i am also curious how you fuse them so perfectly. My question will be the same as Manish...
PC: Dell Inspiron i3, 2.27GHz,4GB RAM,64 bit windows 7
CAMERA:
David CCD Mono USB
LASER:
David 5mW Green line laser
PROJECTOR:
3D LED Mini Projector 250lumens, Native 1024x600
[b]http://free3dscans.blogspot.com/
Khalid Khattak
 
Posts: 942
Joined: Thu Apr 23, 2009 1:30 pm
Location: Pakistan
Top

Re: Little objects

Postby cnc Dave » Tue Apr 23, 2013 5:39 pm

I'm getting quite good at reading Italian/English, it's quite clear to me.

Stecma is saying the manual is wrong. He is not doing horizontal scanning or vertical scanning he has raised his camera up so he is using a combination of both. The camera is seeing from the side and above the projected image.

Stecma, am I right?

Very good scans by the way, well done. Have you done them without coating them in any way?

Regards Dave
User avatar
cnc Dave
 
Posts: 193
Joined: Sat Mar 14, 2009 5:50 pm
Location: UK
Top

Re: Little objects

Postby stecma » Tue Apr 23, 2013 6:14 pm

Dear friends, I place the most important things you need to do to get results very precise. There would be others of lower-level software and calibration, but they are a bit 'long to explain, I hope to be useful Regards Paul
Attachments
Piccoli oggetti (Custom).jpg
Little object configuration
Grandi oggetti (Custom).jpg
Medium/Large object configuration
Proiettore (Custom).jpg
Projector configuration
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)
Top

Re: Little objects

Postby stecma » Tue Apr 23, 2013 7:26 pm

ps scanned without coating
Otto Grunf
User avatar
stecma
 
Posts: 107
Joined: Mon Apr 08, 2013 9:14 pm
Location: Mergozzo (Vb - Italy)
Top

Re: Little objects

Postby manish » Wed Apr 24, 2013 4:42 pm

hi Stecma,

Thanks and really helpful.

Regards
Manish
manish
 
Posts: 120
Joined: Sat Oct 30, 2010 6:18 pm
Location: mumbai
Top

Re: Little objects

Postby Sisi » Thu Apr 25, 2013 7:56 am

Hi Stecma,

i've got a question about the resolution and the objet of the camara...
CCD Camera, how mutch pixel? Focus?

THX
Sisi
 
Posts: 9
Joined: Wed Nov 09, 2011 9:05 pm
Location: Germany / Bavaria
Top

Re: Little objects

Postby discosteve » Thu Apr 25, 2013 8:06 am

I'm pretty sure that's the standard componentry (not sure about the objective) of the David SLS kit Sisi :)
discosteve
 
Posts: 1
Joined: Tue Mar 05, 2013 9:20 am
Top
Next
Post a reply

Return to Structured Light Scanning

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
cron