Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

Shape Fusion alignment problems

The place for all topics related to the 'Shapefusion' tool of DAVID.

Shape Fusion alignment problems

Postby Hiet » Tue Dec 04, 2012 11:14 am

Hello,

we have tried to scan a puppet head with the new David structured light scanner. Calibration and scanning from 3 differrent points worked well (at least the resulting scans didn´t look bad). When trying to align the 3 scans with shapefusion, however, things went bad. Alignment of the first 2 scans is really bad (see screenshot), alignment of the 3rd is even worse. We tried to keep to the manual and used all possible registration/alignment ways. Any ideas would be appreciated...

Kind regards, Thomas
Hiet
 
Posts: 1
Joined: Wed Nov 28, 2012 8:43 am

Re: Shape Fusion alignment problems

Postby VDX » Tue Dec 04, 2012 11:22 am

Hi Thomas,

maybe you need more 'overlapping' points, so best scan with lower angular displacement and more single scans ... so the aligner has some more data to work with :wink:

For a 360°-scan I'm working with 6 or even more scans with automatic alignment ...

Viktor
VDX
 
Posts: 260
Joined: Wed Jul 04, 2012 1:35 pm


Return to Shape Fusion

Who is online

Users browsing this forum: No registered users and 1 guest

cron