Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by the end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

Example of Shape Fusion Output Wanted

The place for all topics related to the 'Shapefusion' tool of DAVID.

Example of Shape Fusion Output Wanted

Postby Joe » Mon Jun 28, 2010 5:33 am

Hi all,

Could someone please help me out and give me a very good Hi-Res file they have produced with Shape Fusion. Preferably in all three output formats Shape Function produces, .OBJ, .STL, .PLY

I want to see how much I can minipulate it with the CAD software I have before I go building a scanner. Want to see if the files are workable for what I need to do.

Image can be anything, but something like a car would be great, that's the type of thing I intend to scan.

Thanks for the help !

Joe
Joe
 
Posts: 2
Joined: Mon Jun 28, 2010 2:21 am

Postby hal » Mon Jun 28, 2010 4:52 pm

Hello,

if you want, I can share this FIAT 127 model or this bike model. Both scanned with David Laser Scanner.

Best Regards,
Mattia
PC: DELL Alienware 17, Intel I7-4710MQ, 32 Gb Ram, AMD Radeon R9 M290X 4GB.
SO: Win 8.1 64Bit.
CAMs: USB 3.0 CMOS B/N (1280x960, 60 fps).
LENS: 12 mm.
PROJECTOR: DAVID SLS1 ACER K11.
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

Re: Example of Shape Fusion Output Wanted

Postby Joe » Mon Jun 28, 2010 5:17 pm

Mattia, that is fantastic.

Sent you a PM.

Thank you !!!

Joe
Joe
 
Posts: 2
Joined: Mon Jun 28, 2010 2:21 am

Re: Example of Shape Fusion Output Wanted

Postby moog » Wed Jun 30, 2010 10:10 am

I would really appreciate it, Might i be so bold as to ask for these also?
LC532-5-3-F(16x65), BenQ PB8220 DLP Projector, logitec quickcam PRO9001, Casio EX-FH20
moog
 
Posts: 235
Joined: Sat Oct 24, 2009 8:54 am
Location: Australia, Gold Coast

Postby hal » Wed Jun 30, 2010 11:30 am

@ Joe & moog:
Ok, Done.

Everyone that want some models from me (obviously for free) just to tasting and see what David Laser Scanner allow to do, please contact me via Private Message. Usually I need your valid e-mail account to send the hosting service's link, for the downloading.
OBJ files are my default file format, but STL and PLY are available if requested.

Best Regards,
Mattia
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.


Return to Shape Fusion

Who is online

Users browsing this forum: No registered users and 1 guest