Dear DAVID Community,

As you are probably aware, the entire DAVID company, team and product range has been integrated into HP Inc.
This forum is now read-only. Relevant content has been migrated to HP and merged into HP's Support Forums on November 1, 2016.

To start new discussions for 3D Scanning, please register and post your new topic at the HP Support Forums

What is the maximum degrees error?

The place for questions, problems, comments and tips regarding the camera calibration.

What is the maximum degrees error?

Postby tailele » Sat Mar 05, 2016 8:46 pm

Hi , i scan my first calibration panel. My hardware is in my firm... Now when I scan the calibration panel after the calibration ( naturally ) I load it on geomagic and then I try to misure the angle... I see that my angle is 89,956 degrees..so I have done a calibration panel with a error of 1/2 decim of degrees . Could it be acceptable or i probably have some error when I ll try fuse a scan?
Benq w700, hp elitebook 8570w; blackmagic intense shuttle 3.0; nikon D600; Nikon macro 105mm VRII
tailele
 
Posts: 25
Joined: Sat Apr 25, 2009 2:55 pm

Re: What is the maximum degrees error?

Postby drndadoo » Mon Mar 07, 2016 8:49 am

In calibration process this small errors are compensated. Alignment function should work good for you.
drndadoo
DAVID Support
 
Posts: 194
Joined: Tue Mar 24, 2015 3:09 pm


Return to Camera Calibration

Who is online

Users browsing this forum: No registered users and 1 guest

cron