Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by then end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

What is the maximum degrees error?

The place for questions, problems, comments and tips regarding the camera calibration.

What is the maximum degrees error?

Postby tailele » Sat Mar 05, 2016 8:46 pm

Hi , i scan my first calibration panel. My hardware is in my firm... Now when I scan the calibration panel after the calibration ( naturally ) I load it on geomagic and then I try to misure the angle... I see that my angle is 89,956 I have done a calibration panel with a error of 1/2 decim of degrees . Could it be acceptable or i probably have some error when I ll try fuse a scan?
Benq w700, hp elitebook 8570w; blackmagic intense shuttle 3.0; nikon D600; Nikon macro 105mm VRII
Posts: 25
Joined: Sat Apr 25, 2009 2:55 pm

Re: What is the maximum degrees error?

Postby drndadoo » Mon Mar 07, 2016 8:49 am

In calibration process this small errors are compensated. Alignment function should work good for you.
DAVID Support
Posts: 194
Joined: Tue Mar 24, 2015 3:09 pm

Return to Camera Calibration

Who is online

Users browsing this forum: No registered users and 1 guest