Dear DAVID Community,

In 2016, DAVID and this forum have been integrated into HP Inc.
This forum has been read-only since then, and will be switched off by the end of 2019.

To everyone who has contributed here, we thank you for all your work and for the constructive, helpful and friendly atmosphere you have created!
Please continue to discuss on the HP Support Forums.

for heavy and/or delicate object

The place for questions, problems, comments and tips regarding the camera calibration.

for heavy and/or delicate object

Postby hal » Thu Mar 08, 2007 12:53 pm

hi

in reference to my previous msg, i succesful scan with calibpoint in external position instead behind object. like fig 1 and 2 (WISH section in the forum). i try again the scanning. i set the correctly scale of marker and now the laser line was detect on neutral background. it's a good thing for the delicate object who can't be moved frequently.

this tip aren't present in user's manual...

but work perfectly: result is = the standard approach.

i hope this can help someone

Yeeesssss!!! 8) :shock:


for ITA: la calibrazione e scansione è possibile anche con l'anglolo di calibratura posto non necessariamente dietro l'oggetto. come nello foto allegate sopra, si può scansire anche senza muovere l'oggetto per fare una ripresa dei marker. non male, se si pensa che non tutti gli oggetti sono spostabili o sono pesanti e/o delicati (come la mia scultura del 1600).

spero che il consiglio serva a qulacuno.

bye
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.

external

Postby hal » Sat Mar 10, 2007 12:18 pm

a test scan with other tipe of cali-bangle. work perfectly! :D
Attachments
External Ref.jpg
User avatar
hal
Moderator
 
Posts: 1527
Joined: Thu Mar 01, 2007 4:08 pm
Location: Cavaria con Premezzo (VA), Italy.


Return to Camera Calibration

Who is online

Users browsing this forum: No registered users and 1 guest

cron